Volver al blog
Artículo

Small Cement Prefabricated House

Admin 18 de septiembre de 2026

The small cement prefabricated house is an assembled house centered around prefabricated reinforced concrete modules, adopting a factory-prefabricated + on-site assembly model. It offers advantages in terms of efficiency, cost, and structural performance, but attention should also be paid to the hidden dangers of early products and the improvements in current technology.

I. Core Process and Characteristics The small cement prefabricated house uses high-precision molds at specialized production bases to cast core components such as walls, floors, beams, and columns in one go. Each module integrates a steel reinforcement skeleton, insulation layer, waterproof layer, and pre-embedded piping structures, and is connected on-site through pre-stressed bolts and welded steel plates to form an overall framework. Its characteristics include:

  1. Efficiency Advantages: A single 30㎡ module takes only 7 days to prefabricate in the factory, and 3 workers on-site, with the assistance of a crane, can complete the installation of a single module in 4 hours. The overall construction of a 100㎡ house takes only 2 days. There have been cases in rural areas of Henan where villas were assembled in 4 hours and entire houses were built in two days.
  2. Cost Advantages: Taking a 120㎡ self-built rural house as an example, the cost of a traditional brick-concrete structure is approximately 180,000 to 220,000 yuan, while the cost of the main modules of a cement house is only 120,000 to 150,000 yuan, reducing the overall cost by 30%. There have been cases in Henan where the cost per square meter was just over 300 yuan and large villas cost around 100,000 yuan.
  3. Structural Performance: Using C30-C40 grade concrete with built-in Φ8-Φ12 steel reinforcement mesh, the compressive strength reaches 25-30MPa, which is 1.5 times that of traditional brick-concrete structures; it has a wind resistance rating of 10 and an earthquake resistance rating of 7 degrees (equivalent to the destructive power of the Wenchuan earthquake). Construction units claim that each house weighs about 30 tons and can be inhabited for 70 years without problems.
  4. Application Scenarios: Suitable for rural self-built houses, commercial spaces, cultural and tourism projects, etc., modules can achieve free layout of house types through horizontal splicing and vertical stacking (up to 3 floors).

II. Hidden Dangers and Improvements of Early Products Early cement prefabricated panel houses (non-integral modular houses) had three major issues:

  1. Splicing Defects: Gaps led to poor sound insulation and water leakage, with rainwater seeping in and corroding the steel reinforcement, shortening the service life.
  2. Weak Earthquake Resistance: Minor earthquakes could trigger collapses, posing safety risks.
  3. Inconsistent Quality: Poor-quality prefabricated panels had a short service life, affecting the overall structural stability. Current technology has addressed these defects and improved the durability and safety of the houses through process improvements such as integral frame shear wall structures and high-precision mold casting.