Simple Mobile Toilet Structure

The structure of simple mobile toilets varies depending on the manufacturing method. Common structures are as follows:

Simple Mobile Toilet Made from a Water Storage Bucket

• Mobile Structure: Fix universal wheels at the four corners of a wooden board for easy overall movement.
• Main Frame: Split the water storage bucket in half lengthwise. Use wooden strips to fix them on the upper side of the bucket to increase height. Place the upper half of the bucket on top of the wooden strips to form a roof.
• Walls and Door: Cut an opening on the side of the bucket for the door. Install sponge strips to form the door frame and embed plastic soft boards to create raised walls.
• Drainage System: Drill a hole at the bottom of the bucket and install a drain pipe to form a floor drain. Drill holes on the side to connect direct fittings. Also drill a hole at the bottom of the bucket to install a direct fitting, and connect the drain pipe to the sewage bucket.
• Water Supply System: Place a plastic bucket on the roof to form a small water storage device. Use water pipes to make a bath heater. Install a three-way fitting below the inlet pipe and connect it to a showerhead. Connect the outlet pipe's three-way fitting horizontally to a water pipe extending to the door as the inlet pipe for the sink. Drill a hole in the door, install a fitting, and connect a hose.
• Sanitary Facilities: Place the toilet on the drain pipe opening and install a water tank. Fix the toilet with glass glue.

Simple Mobile Toilet Made from a Water Storage Tank and a Pallet

• Mobile Structure: Fix universal wheels at the four corners of the bottom of a plastic pallet for easy movement.
• Main Frame: Place a water storage tank on the pallet. Cut along the marked line at the top of the tank to remove the top, creating an open tank. Invert another open-top water storage tank and stack it on the first one. Secure the outer frames of the two tanks with self-tapping screws.
• Walls and Door: Cut a rectangular opening in the outer frame of the water storage tank to form a door opening. Fix hinges on the frame of the water storage tank, with the other side of the hinges fixed to a wooden board to form the door of the toilet. Install a door handle on the door.
• Drainage System: Drill a hole in the internal floor of the water storage tank. Insert an elbow from the bottom upwards and cut into a water pipe. Seal the gaps with glue and then cut off the excess water pipe. Connect a pipe cap to the water pipe and drill a hole at the bottom of the cap as the outlet for the drain pipe.
• Water Supply System: Fix a water pipe with a clip on the wall and install a faucet. Fix a pipe cap under the faucet with screws. Connect an inlet pipe to the toilet water tank. Connect a shower hose and install a shower bracket. Use a water pipe to make a spray-type showerhead.
• Sanitary Facilities: Align the toilet with the drain outlet and fix it with glue. Drill a hole in the pipe cap, apply glass glue, and fix a sink made of a stainless steel basin.