How to Flush Shanxi Mobile Toilets
The flushing methods for mobile toilets in Shanxi mainly include high-pressure air-water flushing, foam flushing, ordinary water flushing, and pedal flushing.
High-pressure air-water flushing: This flushing method utilizes the combined action of high-pressure water flow and gas to clean the inner walls of the toilet bowl. Its advantages lie in its high flushing pressure and wide coverage. It can clean the toilet bowl with only one-fifth of the water used in ordinary flushing, greatly saving water resources. In terms of flushing control, it is achieved through the collaboration of an infrared sensor and a computerized intelligent system. When the user leaves the toilet bowl, the infrared sensor detects this change and sends a signal to the computerized intelligent system, which then activates the high-pressure air-water flushing device to ensure a good flushing effect after each use and maintain the cleanliness and hygiene of the toilet.
Foam flushing: An automatic foaming machine is installed in the equipment room, which continuously generates foam and covers the surface of the toilet bowl, forming a layer of snow-white foam. This process uses foam produced by a mixed liquid to replace the conventional flushing method. The foam not only effectively cleans the toilet bowl but also forms a barrier between the excreta and the toilet bowl, blocking the emission of odors and making the interior environment of the mobile toilet more fresh and pleasant. At the same time, the foam flushing method also significantly saves water resources, aligning with the concept of environmental protection and energy conservation.
Ordinary water flushing: Some mobile water-flushing toilets adopt a relatively traditional flushing method. After using the toilet, the user presses a flush button or pulls a handle, and the water in the tank quickly flows through the pipes into the toilet bowl, mixing with the excreta and flushing it into a sealed storage tank below or directly into the sewage treatment pipeline. This method is simple and straightforward to operate but consumes relatively more water resources.
Pedal flushing: Some mobile simple toilets use a pedal flushing method. After using the toilet, the user simply steps on a black ball, and the squat toilet automatically flushes. This design is convenient and quick, especially suitable for places with high requirements for operational convenience, such as outdoor event sites and temporary construction sites.
