Ruzhou Mobile Toilet Installation

The installation of mobile toilets in Ruzhou must follow standardized procedures, covering pre-installation preparation, core installation, safety compliance, and troubleshooting. The specific steps are as follows:

I. Pre-Installation Preparation

1. Site Survey and Planning: Confirm the installation location in advance, avoiding low-lying areas prone to water accumulation, areas beneath high-voltage power lines, and busy pedestrian pathways. Reserve at least 1.5 meters of operating space to ensure equipment stability and ease of use.
2. Equipment Inspection and Inventory: Upon receiving the equipment, verify the quantity, appearance, and completeness of accessories. Focus on checking the integrity of water and electrical connections (e.g., no damage to water pipes or electrical connectors) and internal facilities (e.g., flushing systems, door locks) to prevent installation delays due to missing parts.

II. Core On-Site Installation Steps

1. Foundation Fixing and Leveling: Place the equipment on a flat surface and calibrate it using a level. If the ground is uneven, use adjustable feet or shims to level it. Tighten the fixing bolts according to the instructions to prevent tilting or shaking.
2. Water and Electrical Connection Specifications:
   • Drainage System: The slope of the sewage pipe must be ≥2%. Seal the joints with sealing tape or waterproof glue to prevent leakage.
   • Power Supply System: Must be operated by a professional electrician, using residual current devices (RCDs) to ensure electrical safety.
3. Internal and External Facility Debugging: Check if the flushing system is functioning properly, ensure that doors, locks, toilet paper holders, and other components are securely installed, and fill the water tank in advance for testing to confirm full functionality.

III. Safety and Compliance Points

1. Fire and Theft Prevention Measures: Keep the equipment away from fire sources, prohibit the storage of flammable and explosive materials inside, and recommend installing anti-theft locks after installation to ensure safety.
2. Environmental Protection and Hygiene Standards: Regularly clean the septic tank, ensure the sewage outlet is leak-proof, and consider installing sunshades during hot summer months to reduce odors and bacterial growth.

IV. Common Problem Handling

1. Equipment Tilting: Re-level using adjustable feet; if severely tilted, refix the foundation.
2. Water and Electrical Failures: For power outages, first check the RCD; for drainage blockages, prioritize unclogging the pipes and avoid disassembling them yourself to prevent damage.

V. Industry Reference Standards

The design and installation of mobile toilets should refer to relevant standards such as the Hygiene Specifications for Mobile Toilets (GB/T 21239-2023) to ensure structural safety, hygiene compliance, and environmental protection.