Prefabricated Panel House Construction Video

Here is an introduction to videos related to the construction of prefabricated panel houses:

I. Full Process Video of Prefabricated Wall Panel Installation This video comprehensively demonstrates the installation process of prefabricated wall panels at the construction site. First, construction workers carry out positioning and marking according to the construction drawings to ensure the accuracy of the wall panel installation positions. Next, the exterior wall panels are hoisted and installed, and the wall panel supports are fixed to ensure the stability of the wall panels. Subsequently, the installation of interior wall panels is carried out, including steps such as wall panel sealing and grouting, to ensure the tightness and integrity of the wall panels. In addition, the video also shows key steps such as wall column rebar tying, formwork installation, hoisting beams and placing vertical supports, laminated floor slab hoisting, and stair slab hoisting. After the laying and connection of water and electricity pipelines are completed, the upper-layer rebar installation and pouring of the floor slab are carried out, followed by inspection and acceptance to ensure that the construction quality meets the standards.

II. Construction Process Video of Prefabricated Laminated Panel Installation This video focuses on the construction process of installing prefabricated laminated panels. Before hoisting, the lifting fixture for the laminated panels uses a lifting steel beam to ensure that the lifting points bear force simultaneously and the components remain stable, avoiding problems such as cracks and distortions during the hoisting process. The tower crane slowly lifts the prefabricated panel, and construction workers need to closely monitor the safety conditions during the hoisting process to ensure that the prefabricated panel is placed steadily and accurately at the predetermined position. This process places high demands on the operational skills and safety awareness of the construction workers and is an important part of the construction of prefabricated panel houses.

III. Full Process Video of Workers Building a Prefabricated Modular House Starting from an empty lot, this video records the entire process of workers building a prefabricated modular house. The workers first unload the heavy timber and build the house chassis frame on the pre-poured cement foundation, laying the foundation for subsequent construction. Next, they lay the floor joists, install the prefabricated wall modules, build the interior partition wall frames, and lay the second-floor floor beams. Finally, they construct the roof to complete the entire house construction. This process demonstrates the convenience and efficiency of the construction of prefabricated modular houses and reflects the advantages of modern construction technology.