Prefabricated Main Beam for Housing
The prefabricated main beam for housing is a key prefabricated component in prefabricated concrete frame structures. It is manufactured in a factory and then transported to the site for installation, featuring high standardization and fast construction efficiency.

Definition and Types
The prefabricated main beam is a major component of prefabricated concrete frame structures, including two types: prefabricated solid beams and prefabricated composite beams. Its core feature is factory-standardized production, formed through mold casting. Parameters such as concrete strength and steel bar specifications strictly adhere to design requirements (e.g., C40 concrete, HRB500E-grade main reinforcement), ensuring millimeter-level precision in component accuracy. Taking the KL-1 to KL-3 beams used in Building 3 of XX Residential Community as an example, their cross-sectional dimensions range from 300mm×700mm to 400mm×900mm, with spans covering 6.6m to 8.4m and a single beam weighing up to 8.2t, demonstrating the adaptability of prefabricated components to complex structural requirements.
Key Points of Construction Plan
- Technical Preparation: A tripartite review of the drawings must be completed, focusing on verifying details such as the positions of sleeves at beam ends and the angles of lifting ring embedments. For example, the four reserved sleeves with a diameter of 25mm at the beam ends must meet a pull-out resistance of ≥600kN to ensure reliable connection with the cast-in-place structure; the single bearing capacity of the M20 lifting rings at the beam bottom must be ≥10t to ensure lifting safety.
- Material Control: Raw materials must be accompanied by certificates of conformity and retest reports, with steel bars tested for yield strength, elongation, and other indicators; upon arrival, components must be checked for their numbers, and their geometric dimensions must be measured, with the appearance defect rate controlled within 0.5%.
- Installation Process: The connection technology of "cast-in-place composite section + sleeve grouting" is adopted, achieving precise positioning through three elevation control points on the top surface (with an accuracy of ±2mm). For example, the Qingdao Metro Line 7 project simulated the lifting path using BIM technology, reducing the installation time of a single beam to 40 minutes.
Advantages and Disadvantages Analysis
Advantages:
- Quality Control: The factory environment eliminates on-site construction errors. For example, the Shanmei Expressway Smart Beam Yard reduced the time for beam strength to meet standards from 10 days to 1 day through an intelligent steam curing system.
- Efficiency Improvement: Reduces on-site wet work. The XX Residential Community project shortened the construction period of the main structure by 25% through the application of prefabricated main beams.
- Cost Optimization: Mass production reduces the unit cost, saving about 15% in material waste compared to traditional cast-in-place methods.
Disadvantages:
- High Initial Investment: Requires the construction of a dedicated prefabrication plant, with a single production line investment exceeding ten million yuan.
- Transportation Restrictions: Oversized components require special transportation permits. For example, an 8.2t beam requires a 13m semi-trailer for sectional transportation.
- Technical Threshold: Sleeve grouting connection requires professional equipment, and operators must pass certification training from the housing and urban-rural development department.
Typical Application Scenarios
Suitable for projects with tight schedules, stringent quality requirements, or restricted construction conditions. For example, an assembly-type building in the Xiong'an New Area achieved structural safety under an earthquake resistance intensity of 8 degrees through the collaborative design of prefabricated main beams and shear walls; an underground utility tunnel in Qianhai, Shenzhen, successfully controlled settlement differences to ≤3mm in soft soil foundations using composite beam technology.




