Volver al blog
Artículo

Prefabricated House Walls

Admin 17 de septiembre de 2026

There are mainly two types of prefabricated house walls: cement prefabricated panel walls and prefabricated assembled building walls.

Cement prefabricated panel walls: These are primarily made of Portland cement and steel reinforcement frames, pre-fabricated into panel structures using molds. The walls come in two types: solid and hollow. Hollow prefabricated panels can reduce weight and cost, offering the advantages of simple construction and lower expenses. They were commonly used in brick-and-mortar structures in the early days, with standard specifications including a maximum span of 4.2 meters, widths typically of 500mm or 600mm, and thicknesses mainly of 120mm and 150mm. However, cement prefabricated panel walls have significant drawbacks: poor thermal insulation, making it difficult to meet modern building energy efficiency requirements; insufficient structural stability, prone to damage under external forces such as earthquakes; weak load-bearing capacity, limiting their use in high-rise buildings; and cracking and water leakage at panel joints, affecting building durability. Due to these defects, cement prefabricated panel walls are now prohibited in the construction field, with cast-in-place panels commonly used as an alternative. Nevertheless, prefabricated concrete wall panels, as one of the prefabricated building components, are still used in some projects, provided their design, production, and construction comply with current regulations.

Prefabricated assembled building walls: These represent an industrialized method of producing building components for on-site assembly, with main types including panel-assembled, box-assembled, and frame-assembled structures. The technology encompasses prefabricated concrete and steel structures, with components such as beams, panels, walls, and columns. Panel-assembled buildings use prefabricated wall panels and floor slabs as core components, enabling rapid construction through standardized design and expanding usable area, though they are limited by design flexibility and are suitable for highly standardized building types. Modular buildings break down structures into independent modules, manufactured in factories and then transported to construction sites for assembly. Ceilings, walls, and other elements are all produced in factories, with each steel bar positioned with millimeter-level precision to control errors and ensure construction quality and efficiency. Prefabricated assembled building walls offer advantages such as short construction periods, controllable quality, and environmental protection and energy efficiency, aligning with modern building industrialization trends and widely used in residential and office buildings.