Volver al blog
Artículo
Prefabricated House Inventory
Admin 17 de septiembre de 2026
The inventory of building materials and tools for cement prefabricated mobile houses includes three main categories: basic building materials, masonry and decorative materials, and construction equipment, as detailed below:

I. Basic Building Materials
- Cement: It is necessary to select Portland cement with a grade of 42.5 or higher. This type of cement has high strength and rapid hardening, meeting the needs for rapid molding of prefabricated components while ensuring structural durability.
- Steel: It is recommended to use HRB400-grade deformed steel bars with a diameter range of 8-14mm. This type of steel bar has a high yield strength and is suitable for load-bearing structures; it requires a配套 (matching) anti-corrosion galvanizing process to prevent steel corrosion from causing structural failure and extend the service life of the house.
II. Masonry and Decorative Materials
- Hollow Bricks: Burnt hollow bricks with specifications of 390×190×190mm should be selected, with a porosity exceeding 40%. High porosity reduces the self-weight of the bricks, lightens the overall load of the house, and improves thermal insulation performance, meeting energy-saving requirements.
- Composite Wood Panels: It is recommended to purchase OSB (Oriented Strand Board) with a thickness of 12-15mm. This type of panel is formed by hot-pressing oriented wood chips, providing strong structural stability; it must have a fire certificate to ensure fire safety; and its formaldehyde emission level must meet the E1-grade certification standard to safeguard indoor air quality.
III. Construction Equipment
- Electric Tool Set:
- Concrete Vibrator: It requires a power of over 3.5kw and is used to vibrate concrete, expel internal air bubbles, increase density, and avoid defects such as honeycombing and pitting.
- 12V Portable Steel Bar Bender: It can process steel bars on-site, adjust bending angles, and meet the customization needs of steel bar frameworks in prefabricated components.
- Multi-functional Angle Grinder: It is used for cutting steel, grinding component surfaces, treating burrs or uneven areas, and improving construction precision.
- Measuring Instruments:
- Laser Level: It projects horizontal or vertical reference lines through laser beams to assist in component positioning and installation, ensuring that the verticality and flatness of the house meet specifications.
- 5m Steel Tape Measure: It is used to measure component dimensions, spacing, and other parameters with millimeter-level precision and is the most commonly used basic measuring tool in construction.
The above inventory covers the full-process needs of cement prefabricated mobile houses from structural construction to decorative construction. The selection of materials and tools is centered on safety, durability, and construction efficiency.
Relacionados




