Volver al blog
Artículo

Custom Joint Seams in Prefabricated Houses

Admin 18 de septiembre de 2026

The treatment of custom joint seams in prefabricated houses must strictly adhere to specifications; otherwise, issues such as water leakage and structural safety may arise. During acceptance, comprehensive evaluation from multiple aspects such as appearance and construction conditions is required.

Importance of Joint Seam Treatment

If the joint seams of prefabricated panels are not properly treated, multiple risks can be triggered. At the structural safety level, in cases of foundation settlement, temperature changes, or earthquakes, untreated joint seams may lead to structural fractures due to stress concentration. At the functional damage level, rainwater can easily penetrate indoors through joint seams, causing wall mold, circuit short circuits, and even affecting the building's durability. For example, joint seam cracks caused by the deformation of laminated panels may directly weaken the load-bearing capacity of the floor slab.

Causes of Cracking and Prevention

  1. Structural Deformation: Foundation settlement and temperature changes cause deformation in laminated panels, leading to cracking when stress concentration at the joint seams exceeds the material's tensile limit. Prevention can be achieved through reasonable design of expansion joints and control of foundation settlement differences.
  2. Material Performance Differences: The different elastic moduli of prefabricated panels, plaster layers, and decorative coatings result in stress accumulation due to relative deformation under environmental changes. Compatible materials should be selected, such as low-shrinkage concrete, and the construction environment's temperature and humidity should be controlled.
  3. Construction Process Defects: Improper treatment of joint seams (such as not roughening the concrete surface or unreliable steel bar connections) can weaken the overall integrity. It is necessary to strictly clean debris from the seams, rinse them with water, chisel them into a V-shape when the seam width exceeds 5 millimeters, fill them with fine aggregate concrete, reinforce them with 12-millimeter threaded steel bars, and allow them to dry for 3 days after grouting to avoid trampling.
  4. Long-term Vibration Disturbance: Micro-loads such as traffic flow and renovation vibrations continuously disturb the joint seams. The impact can be reduced by adding shock-absorbing pads and optimizing structural connections.
  5. Aging and Uneven Loads: Aging of the filling layer and local stacking of heavy objects cause differences in panel deformation. It is necessary to regularly inspect the condition of the joint seams, avoid overloading, and promptly repair aging parts.

Acceptance Criteria and Process

  1. Pre-requisites: The acceptance scope covers all joint seams of prefabricated components in assembled buildings. The construction party must complete three levels of self-inspection, and the site must meet acceptance conditions (such as being free of debris and having sufficient lighting).
  2. Appearance Quality: Focus on identifying visible defects, such as whether the crack width exceeds 0.2 millimeters, whether the joint seams are straight and continuous, and whether the decorative coating is peeling or hollow.
  3. Functional Inspection: Verify waterproof performance through a water spraying test to ensure no leakage; check whether the steel bar connections are secure and whether the grout density meets standards.

Strictly adhering to treatment and acceptance specifications can significantly enhance the durability and safety of joint seams in prefabricated houses and reduce long-term maintenance costs.