Volver al blog
Artículo

Prefabricated House Connectors

Admin 18 de septiembre de 2026

Prefabricated house connectors come in a variety of types, covering different structural and functional requirements, with connection methods varying depending on the type of component.

I. Connectors for the Main Structure of Prefabricated Houses

  1. Sleeve Grouting for Rebar Connection CGM sleeve grouting for rebar connection from brands such as Carma Bella and Shenyang Ruite Jiangu is primarily used for connecting prefabricated frame columns to foundations in prefabricated residential buildings. High-strength grouting fills the gap between the rebar and the sleeve, achieving mechanical interlocking of the rebar and ensuring structural integrity.

  2. Connectors for Container Houses Enterprises like Henan Tuoyong provide specialized connectors for container houses, typically using high-strength bolts or welding for rapid assembly of modular containers, meeting the assembly needs of temporary buildings or mobile houses.

  3. Connectors for Light Steel Houses The light steel connectors from Botou Longchang Machinery Equipment Co., Ltd. include anti-pull-out components, ground anchor base connectors, and wind-resistant tension members, which are fixed to light steel studs via bolts or welding, enhancing the structure's wind and earthquake resistance, suitable for low-rise residences or villas.

  4. Connectors for Steel Structure Houses The galvanized anti-pull-out connectors and stud connectors from Sichuan Zhongtian Shengyuan Technology are galvanized for corrosion resistance and connect steel components via bolts or welding, suitable for multi-story steel residential or commercial buildings.

II. Connection Methods for Prefabricated Floor Slabs

  1. Double-T Slab Connection

    • Rib-Bottom Connection: Steel plates or pipes are embedded at the rib bottom of the double-T slab and the top of the supporting beam, fixed via welding or bolts.
    • Tongue-and-Groove Connection: The double-T slab and the supporting structure are slotted to form a mortise-and-tenon structure, enhancing connection stability.
    • Steel Embedded Connectors: Embedded connectors are fixed to the supporting structure via bolts or welding, suitable for large-span floor slabs.
  2. Connection of Prestressed Concrete Hollow Slabs Typically, reserved rebar at the slab end is cast-in-place with the supporting structure, or dry connections are achieved using specialized connectors (such as angle steel or steel plates), simplifying the construction process.

III. Connection Interfaces for Prefabricated Components and Fittings

  1. Exterior Wall Cladding Connection According to the national standard Prefabricated Concrete Exterior Wall Cladding, the joints of insulated exterior wall cladding adopt a "material waterproofing + structural waterproofing + material waterproofing" system, with a joint width of 30-50mm, filled with fireproof and elastic sealing materials; Singapore's non-insulated exterior wall design places the waterproof layer on the inside, with no gap between the panel and the main structure.

  2. Exterior Window Connection In prefabricated concrete sandwich insulated exterior wall panels, windows are connected to the insulation layer via preservative-treated wood to avoid thermal bridges; non-insulated exterior wall panels can be directly fixed via connectors.

  3. Interior Partition Wall Connection ALC panel partition walls are fixed to the main structure using U-shaped steel clips, with a 10-20mm gap left at the top and bottom, adjusted for verticality using the wedge-down method, and the gap filled with elastic material to accommodate deformation.