Volver al blog
Artículo

Prefabricated House Certification

Admin 17 de septiembre de 2026

The certification requirements for prefabricated houses vary across countries due to differences in regional regulations and standards, necessitating compliance tailored to the target market. Below are the specific certification requirements and considerations for major countries and regions:

United States: Prefabricated houses must obtain HUD (Department of Housing and Urban Development) or IRC (International Residential Code) certification, which is a core requirement for residential use. Additionally, the electrical system must receive UL certification to ensure safety. Regarding land use, most states prohibit placing non-agricultural houses on agricultural land, and permanent residences must meet conditions such as foundation stability and connection to municipal utilities for water and electricity. For example, if a house is intended for long-term residence, its foundation must comply with local seismic or wind resistance standards and be connected to the public water supply system.

European Union: CE certification is mandatory, and compliance with EN 1090 steel structure standards and EN 14889 concrete standards is required to ensure structural safety and material quality. Furthermore, planning permission (Planning Permission) is necessary, and some countries (such as the UK) prohibit the construction of mobile homes on individual plots. If a house is considered a "movable structure," it must meet the requirement of air tightness ≤ 1.5 m/(m·h)@50Pa to reduce energy loss. For instance, Germany has strict regulations on the thermal insulation performance of temporary residences, which must pass air tightness tests before being put into use.

Australia: The certification system varies significantly by state. CodeMark certification and AS/NZS 1170 structural standard certification are general requirements, along with passing the NCC energy efficiency assessment (e.g., New South Wales requires a residential energy efficiency rating of at least 6 stars). Asbestos testing is mandatory, and exported products must provide asbestos-free test reports from NATA-accredited laboratories. Regarding land use, New South Wales allows the construction of accessory dwelling units (ADUs) in backyards, but some areas restrict modular buildings to vacation homes rather than permanent residences.

Southeast Asia: An RCEP certificate of origin is required to enjoy tariff preferences, and local building permits must be obtained. Countries such as Thailand and Vietnam stipulate that foreign investors cannot hold property rights to buildings on land, and houses are often managed as "temporary structures" with a typical lifespan of no more than 5 years. For example, Malaysia requires prefabricated houses to be demolished or reapply for permission within 5 years and must comply with local seismic design codes.

Key Considerations:

  1. Confirm land nature and usage planning in advance to avoid the risk of demolition due to non-compliance;
  2. Performance standards such as energy efficiency and air tightness directly affect market access;
  3. Some countries have a "zero-tolerance" policy for material components (such as asbestos and formaldehyde), requiring strict testing;
  4. The certification paths for temporary structures and permanent residences differ significantly, necessitating a clear product positioning.