Volver al blog
Artículo

Prefabricated Assembly Drawings of House Walls

Admin 18 de septiembre de 2026

The drawing of prefabricated assembly drawings for house walls and the application of relevant drawing collections should be combined with design methods and normative standards. The specific content is as follows:

I. Drawing Methods for Prefabricated Exterior Wall Components

When drawing drawings for prefabricated exterior wall components, design institutes usually use BIM technology to achieve the conversion from 3D modeling to 2D drawings. The specific process is divided into two types of component processing:

  1. Simplified Components: Used for regular plan and elevation drawings in project models, focusing on displaying the overall outline and basic dimensions of components. They are suitable for the preliminary design stage or overall layout display.
  2. Detailed Components: Designed for complex nodes or construction details, they need to be placed in an independent project model for detailed drawing design. Such components contain more detailed information, such as the positions of embedded parts, the structures of connection nodes, and the connections between insulation layers and decorative layers. They are used to generate elevation details, section details, and positioning drawings for embedded parts. For example, metal embedded parts for diagonal braces require statistical tables, installation detail drawings, and annotations of specific dimensions and positioning coordinates; the statistical table for prefabricated exterior walls needs to specify component numbers, specifications, and quantities.

Through the collaborative application of simplified and detailed components, the detailed drawings for prefabricated exterior wall components can be systematically completed, ensuring accurate information transmission in all aspects during the construction stage.

II. Application Specifications for Relevant Drawing Collections

The 16G906 National Standard Drawing Collection is an important basis for the construction of prefabricated components and is applicable to assembled concrete shear wall structure residential buildings where vertical reinforcement is connected using grout sleeves. Its content covers the following aspects:

  1. Structural System and Construction Process: It illustrates and describes the composition of assembled concrete shear walls, requirements for stacking and storing components, finished product protection measures, and the overall construction process.
  2. Key Construction Techniques: It elaborates in detail on the lifting and installation construction techniques of components, including the operating points for grout sleeve connections, treatment methods for cast-in-place nodes, and the waterproof joint structures of exterior wall panels to ensure structural safety and waterproof performance.
  3. Drawing Content Examples: It provides standardized expression methods for drawings related to the construction of prefabricated wall panels, such as component numbering rules, detailed drawings of connection nodes, and acceptance record charts, serving as a reference for design deepening and on-site construction.

Design units need to combine project requirements and refer to the drawing expression logic of similar cases in the drawing collection to ensure that the prefabricated assembly drawings comply with normative requirements. At the same time, they should optimize detailed designs through BIM technology to improve the constructability and information integrity of the drawings.