Volver al blog
Artículo
Material Requirements for Prefabricated Assembled Housing
Admin 18 de septiembre de 2026
The materials for prefabricated assembled housing must meet the following requirements:

I. Concrete Materials
- Strength Grade: The commonly used concrete strength grades for prefabricated components range from C30 to C60 (GB/T 51231 - 2016), with high-rise structures requiring a strength of ≥C40. For example, the minimum strength of the cast-in-place layer of a composite floor slab is C30, while the prefabricated layer requires a strength of ≥C35. The deviation in the 28-day compressive strength of concrete must not exceed ±15%.
- Durability Control: The chloride ion content should be ≤0.06% (≤0.03% in coastal areas); the slump should be controlled between 120 and 180 mm to ensure proper compaction during pouring; the aggregate particle size should be ≤1/4 of the minimum component size and must pass a silt content test (≤1%).
II. Steel and Connectors
- Reinforcement Quality: Main reinforcement should use HRB400 or HRB500, with the measured yield strength being ≥1.25 times the standard value; the diameter deviation should comply with GB/T 1499.2 - 2018, such as a permissible deviation of ±0.3 mm for Φ12 mm reinforcement.
- Connector Specifications: The tensile strength of grout sleeves should be ≥600 MPa (JG/T 398 - 2019); bolt connection sets should undergo anti-corrosion treatment of grade 8.8 or higher, with a salt spray test of ≥500 hours without corrosion.
III. Functional Materials
- Thermal Insulation Materials: EPS boards should have a density of ≥20 kg/m³ and a thermal conductivity of ≤0.041 W/(m·k); rock wool boards must meet Class A fire resistance and have a tensile strength of ≥10 kPa (GB/T 25975 - 2018).
- Joint Sealing Materials: Silicone sealants should have a displacement capacity of ≥25% and an elastic recovery rate of ≥80% (JC/T 881 - 2017).
IV. Other Requirements
- Materials for Prefabricated Rural Houses: Materials should be selected based on local conditions and resources, prioritizing green, economical, or recyclable building materials; local materials should be used preferentially while ensuring quality; materials with high energy consumption or excessive pollution are prohibited.
- Crowded Places: The use of flammable foam sandwich panels for construction is strictly prohibited; non-combustible or fire-resistant materials such as rock wool must be used.
Material selection must strictly adhere to national standards to ensure structural safety, durability, and environmental performance, while also considering economy and applicability.
Relacionados




