Prefabricated Assembled House Roof Tiles
The common types and characteristics of roof tiles for prefabricated assembled houses are as follows:

Resin Tiles Resin tiles are a commonly used material for the roofs of prefabricated assembled houses, especially suitable for prefabricated panel roofs. Their core advantages include being lightweight, corrosion-resistant, heat-insulating, and waterproof, effectively reducing roof loads and extending service life. When installing, three key points require attention:
- Base Layer Preparation: Ensure the roof base layer is flat and dry to prevent tile deformation or detachment due to base layer issues.
- Fixing Method: Typically, special self-tapping screws are used for fixation. The spacing between screws should be controlled (generally not exceeding 60 cm) to prevent tile cracking due to thermal expansion and contraction.
- Joint Treatment: Use waterproof glue or special sealing strips to seal the joints and prevent rainwater infiltration. Recommended products include resin tiles from Foshan Gongying Plastic Technology Co., Ltd. (high cost-performance ratio), antique integrated tiles from Zigong Shuangyu New Material Co., Ltd. (aesthetically pleasing), and corrosion-resistant new house roof tiles from Hengshui Yulong Building Materials Co., Ltd. (strong weather resistance).
Reinforced Concrete Tile Roofs This type is suitable for buildings with high fire prevention or aesthetic requirements, commonly found in antique buildings or industrial plants. The construction process falls into two categories:
- Felting Base Layer Tiling: Lay a leveling layer on prefabricated reinforced concrete hollow slabs or cast-in-place slabs, cover with felting, and then fix the felting strips and hanging strips with wooden wedges before laying the tiles. This process offers excellent waterproof performance but involves multiple construction steps.
- Waterproof Mortar Tiling: Directly apply waterproof cement mortar on the roof slab and affix the tiles. This process simplifies the construction workflow but requires strict control over the mortar mix ratio and application thickness, commonly used in antique building restoration or new construction projects.
Prefabricated Hollow Brick Assembled Floor Roofs This process is commonly seen in arid regions such as the Middle East and Africa, adopting a block-type assembled floor structure. Its characteristics include no need for concrete pouring or mortar application, with hollow bricks supported by steel frames and assembled into shape, offering high construction efficiency and low cost. However, note the following:
- Hollow bricks must have sufficient strength to prevent cracking due to long-term loads or wind pressure.
- Joints must be filled with waterproof materials to prevent rainwater infiltration through brick joints.
- Suitable for dry climates; additional waterproofing measures are required in rainy regions.




