Portable Simple Toilet

A portable simple toilet can be made in the following ways:

Making with a water storage barrel

First, prepare a water storage barrel and use an angle grinder to split it in half lengthwise. Fix universal wheels at the four corners of a wooden board to facilitate the movement of the toilet. Then, use wooden strips and self-tapping screws to fix them on the upper side of the barrel to increase the height. Open a door on the side of the water storage barrel, install sponge strips on both sides of the door to form a door frame, and embed plastic soft boards between the wooden strips to create an elevated wall. Place the upper half of the water storage barrel on top of the wooden strips as the roof. To enhance aesthetics, paint the wooden strips with white waterproof paint. Use foam strips to拼接 (assemble) discarded honeycomb wooden boards to make a simple door. Drill a hole at the bottom of the barrel and install a drain pipe to form a floor drain. Drill holes on the side and bottom of the plastic barrel and connect them with direct fittings. Place the plastic barrel on the roof to form a small water storage device. Connect the bath heater made of water pipes, install a tee under the water inlet pipe and connect it to a showerhead. Place the toilet on the drain pipe hole, install the water tank properly and fix it with glass glue, and connect the drain pipe to the sewage barrel. Horizontally connect a water pipe to the tee of the outlet pipe and extend it to the door as the water inlet pipe for the sink. Drill a hole in the door, install a fitting, and connect a hose.

Making with a water storage tank and a pallet

First, fix a universal wheel at each of the four corners at the bottom of the pallet, and place a water storage tank retrieved from a garbage station on the pallet. Use an angle grinder to cut along the marked line on the top of the water storage tank to remove the top and form an open tank. Invert another open-top water storage tank and stack it on the first tank, and fix the outer frame with self-tapping screws. Cut a rectangular opening in the outer frame of the water storage tank and cut the tank body according to the corresponding size to form a door. Drill a hole in the interior floor of the water storage tank, insert a elbow from the bottom into the water pipe and seal the gap with glue, and cut off the excess water pipe. Place the toilet accurately over the drain hole and fix it with glue. Fix a water pipe on the wall buckle and install a faucet. Fix a pipe cap with screws under the faucet, connect a water pipe to the pipe cap, and drill a hole as the outlet of the drain pipe. Fix a sink made of a stainless steel basin on the pipe cap with glass glue. Connect the water inlet pipe to the toilet water tank, connect the shower hose properly and install the shower bracket, install the toilet seat, and install a spray-type showerhead made of water pipes. Finally, bring wooden boards, fix hinges on the frame of the water storage tank, and fix the other side of the hinges to a wooden box to form the door of the bathroom. Install a door handle on the door.