Plastic Mobile Toilet Process

There are multiple ways to make plastic mobile toilets. Here are three common methods:

Method 1: Combination of Wooden Boards and Aluminum Sheets

First, install four universal wheels at the corners of the wooden board and secure them with wooden strips. Use a cutting machine to cut an appropriately sized notch on the front of the wooden board. Wrap the two cut sides with wooden strips to form a door frame structure and embed aluminum sheets as partitions. Cover the top with the cut-off part of the wooden board and paint the inner wooden strips with white cement for beautification. Then, assemble and make the door panel, and fix it to the door frame with screws using butt hinges. Drill circular holes through the bottom of the inner bucket, install elbows and floor drains, and place the drilled plastic bucket, after connecting it with a thread reducer, into the reserved opening on the top cover. Assemble and splice three-way straight pipes and elbows to form a shape like the Chinese character '日', install a valve switch in the middle, turn it over, drill holes, and connect it to the water outlet. Install a valve switch and a three-way pipe on the outside to transfer to the bucket, and drive in screws to fix the buckles for easy placement of the showerhead. Then, assemble and splice the toilet tank, seal the edge gaps with adhesive, and connect the outdoor sewer pipe to the septic tank. Finally, install the对接 (this Chinese word might need further clarification in a real context, here暂译为 'connecting') elbow water pipe on the door, fix it with a bracket screw on the side, cut a separate water bucket from the neck position, and wrap the cutting surface with a hose.

Method 2: Renovation Based on Plastic Buckets

First, cut the bucket body at the one-third position and install a wheel device at the bottom for easy movement. Nail several wooden strips into the bucket body to increase its height, and make two cracks as the toilet door. Fix two composite wooden boards on the iron sheet edge to make the door sturdy. Place iron sheets in the middle of the increased wooden strips and cover the top with a cut plastic bucket. Overlap the iron sheet connections to prevent peeping. Paint the wooden strips with anti-corrosion paint, overlap the wooden floorboards, and drive in screws to make the toilet door. Install the hinges, test the door opening and closing, drill holes, and install drainage holes. Take a large trash can for renovation, drill holes in the bucket body and bottom, and install water pipe connectors to serve as a water storage bucket for showering. Make a showerhead with PVC pipes, connect the water pipes one by one with strong adhesive, connect a three-way on the main water pipe to divert part of the water to the sink for supply, and also use three-ways inside for showering, etc. Fill the bottom gap with epoxy resin glue after installing the toilet.

Method 3: Construction Using Water Storage Tanks

First, fix a universal wheel at each of the four corners at the bottom of the plastic pallet, place the water storage tanks collected from the garbage station on the pallet, and use an angle grinder to cut along the marked lines on the top of the water storage tanks to remove the tops and form open tanks. Invert another open-top water storage tank and stack it on the first tank, and firmly fix the outer frames of the two water storage tanks together with self-tapping screws. The subsequent steps are similar to the first two methods, including cutting the door opening, installing drainage facilities, fixing the toilet, installing faucets and sinks, etc., and finally installing the toilet door and door handle.