Pingnan Rural Mobile Toilet Specifications
The common specifications of mobile toilets in rural areas of Pingnan are as follows:
Single-person type: The regular model generally has dimensions of 110cm in length, 110cm in width, and 230cm in height (or expressed as approximately 1.1m×1.1m×2.3m in length, width, and height). It occupies an area of about 1.2㎡ - 1.8㎡. The common internal clear dimensions are 1.2m - 1.5m in length × 1.0m - 1.2m in width, with a height generally ranging from 2.2m - 2.5m. This type of toilet is suitable for single-person use and is commonly found in ordinary parks, temporary construction sites, and small event venues. In rural areas, it can be selected for small-scale events or areas with relatively low pedestrian traffic. The mini single-person model has dimensions of 100cm in length, 100cm in width, and 220cm in height. It is mostly used in small exhibitions and commercial streets with high pedestrian traffic and can also be considered for compact spaces in rural areas.
Double-person type: It usually has dimensions of 180cm in length, 110cm in width, and 230cm in height, allowing two people to use it simultaneously. It is suitable for team-building venues, outdoor camping areas, and other scenarios that require multiple people to use the toilet at the same time. In rural areas, it can be selected for collective events or areas with relatively concentrated populations. There is also a view that the length of the double-person shared model will increase to about 2.5m, with the width remaining at 1.1m and the height still around 2.3m, suitable for large-scale event venues that need to accommodate multiple people using the toilet simultaneously. Some information indicates that the length of double-unit mobile toilets ranges from 2.4 - 3.0 meters, the width from 1.2 - 1.5 meters, and the height from 2.2 - 2.5 meters, applicable to large-scale events and tourist attractions. Rural large gatherings can refer to these specifications.
Barrier-free type: It has larger dimensions, generally 180cm in length, 150cm in width, and 240cm in height (or expressed as 1.5m×1.8m×2.4m). It reserves space for wheelchair rotation, facilitating use by people with mobility impairments. It is commonly found in large parks and scenic spot entrances. In rural areas, it can be considered when there is a demand for use by people with mobility impairments or as part of public facility construction. It should be noted that the internal clear dimensions of barrier-free toilet stalls must not be less than 1.8m×1.4m. A barrier-free ramp with a width of more than 0.8m must be provided at the entrance, and sufficient space for wheelchair rotation must be reserved inside the stall.
