Volver al blog
Artículo

Outdoor Mobile Simple Toilet Design

Admin 20 de septiembre de 2026

The design of outdoor mobile simple toilets should focus on mobility, structural stability, and functional practicality. The key points are as follows:

I. Material and Structural Design

Material selection should balance lightweight properties with durability. Composite materials such as fiberglass-reinforced plastic and polyethylene are mainstream choices. Although wood was used in the early days, its poor corrosion resistance has led to its decline. The basic structure includes a fecal sewage storage tank (or treatment device), floor, walls, roof, and mobile device. Single-unit structures can be modified from water storage barrels: split the barrel in half, reinforce the height with wooden strips, embed plastic soft boards to form walls, and cover the top half of the barrel as the roof. Composite structures achieve functional expansion through modular assembly, such as dual-roof designs to distinguish between male and female toilets, and metal carved panel exteriors to enhance light transmission.

II. Functional Component Configuration

  1. Sanitary Facilities: Core components include toilets, water tanks, and drainage pipes (forming floor drains), with optional showers and sinks. Toilets should be fixed with glass glue to enhance stability, and the water tank capacity should meet single-use requirements.
  2. Doors and Sealing: Door frames are filled with sponge strips to seal gaps, and the door body is made of foam strips spliced with honeycomb panels to ensure airtightness and prevent odor leakage.
  3. Water Storage and Sewage Disposal: A small water storage device (such as a plastic bucket) is installed at the top, and a sewage bucket is connected at the bottom. A three-way pipe diverts water to the sink's inlet pipe, enabling water recycling. The sewage bucket should be equipped with a sealed lid to prevent leakage during transportation.

III. Mobility and Adaptability Design

  1. Mobile Devices: Universal wheels are installed at the bottom, or lifting structures (such as metal hooks) are designed for easy manual pushing or mechanical lifting, suitable for temporary locations like stations, docks, and construction sites.
  2. Modular Assembly: Supports multi-unit assembly, such as combining two single toilets into a double-toilet unit with connectors to improve usage efficiency.
  3. Scene Adaptation: The height (usually not exceeding 2.2 meters) and width (about 1.2 meters) are controlled to ensure passage through standard door frames. Metal carved panel exteriors enhance light transmission and reduce internal oppression.

IV. Design Principles

  1. Lightweight and Sturdy: The material density should be less than 2.0g/cm³, and the structural load-bearing capacity should meet adult usage requirements (e.g., floor load-bearing capacity ≥ 150kg).
  2. Environmentally Friendly and Economical: Recyclable materials (such as polyethylene) should be used, and waterproof paint should be applied to the surface to enhance aesthetics. Silicone sealing rings should be used at the connection between the toilet and water tank to reduce water leakage risks.
  3. Easy Maintenance: Components should be fixed with snaps or bolts for easy disassembly and cleaning. The sewage bucket should be designed as a pull-out type to simplify the cleaning process.

Through the above design, outdoor mobile simple toilets can achieve rapid deployment, stable use, and low-cost maintenance, meeting basic sanitation needs in temporary scenarios.