Mobile Toilet Water Test
The water test for mobile toilets mainly involves a water storage test. Generally, the water storage height is 30 - 100mm, and the water storage time is usually 24 hours. During this period, if there is no obvious drop in the water surface, it indicates that the waterproof layer is qualified.
Water Storage Height in the Water Storage Test
In the water storage test for mobile toilet water testing, there are specific requirements for the water storage height. In actual operation, the water storage depth should be no less than 20mm, which is the minimum standard to ensure the effectiveness of the test. However, to detect the waterproofing situation more comprehensively and accurately, the water storage height is usually controlled within the range of 30 - 100mm. This range not only ensures the effectiveness of the test, enabling a full inspection of the waterproof performance of the mobile toilet, but also avoids a series of inconveniences and risks caused by excessive water storage, such as potentially exerting excessive pressure on the structure of the mobile toilet or increasing safety hazards during the test process.
Duration of the Water Storage Test
The duration of the water storage test is generally 24 hours. During these 24 hours, it is necessary to closely observe the condition of the water surface. If there is no obvious drop in the water surface, it means that the waterproof layer of the mobile toilet is qualified and can effectively prevent water leakage, ensuring that there will be no water leakage problems during use. Conversely, if there is an obvious drop in the water surface, it implies that there may be defects in the waterproof layer, and further inspection and repair are required to ensure that the waterproof performance of the mobile toilet meets the requirements.
Other Related Water Testing Situations
In addition to the above-mentioned water storage test, Zhengzhou mobile toilet production factories conduct a series of inspections before shipping, including water testing. This reflects the production factories' strict control over product quality. Through water testing, potential waterproofing problems that may occur during the production of mobile toilets can be detected in a timely manner, preventing the delivery of products with quality hazards to customers. Additionally, the automatic toilet water testing machine is mainly used to check whether the water-saving function of the toilet meets the standards. It is equipped with an automatic CNC flowmeter and a microcomputer LCD display. The CNC flowmeter can control the amount of incoming water, and it automatically stops when the preset value is reached. However, it should be noted that this equipment is mainly for testing the water-saving function of toilets and may have differences from the overall water testing process of mobile toilets. It cannot be regarded as completely equivalent to the water testing of mobile toilets.
