Mobile Toilet Water Tank

The installation, types, and parameter information of mobile toilet water tanks are as follows:

Flexible Installation Position
The mobile installation of the squat toilet water tank has little impact on its performance. If there is insufficient space behind the squat toilet, the water tank can be installed on the left or right side. This design adapts to the spatial constraints of different scenarios, such as temporary event venues or areas with limited space, ensuring that the connection between the water tank and the squat toilet is not obstructed while facilitating user operation.

Types and Working Principles
Some mobile toilets adopt a towable design, equipped with their own water tanks and waterless packing-type squat toilets. These toilets store flushing water in the water tank, and the waterless packing-type squat toilets handle excrement through mechanical or biological degradation methods, reducing dependence on external water sources. They are suitable for scenarios without water supply and drainage systems, such as outdoor exhibitions and construction sites.

Brand and Parameter Diversity
There are numerous brands of mobile toilet water tanks on the market, including Zhengda Hongye, Changjiu, and Honggang Environmental Protection. Their core parameters are as follows:

• Working Pressure: The common range is from 0.3 MPa to 0.6 MPa, with some products reaching up to 100 MPa. The pressure value affects the flushing effect. High-pressure water tanks are suitable for scenarios requiring strong flushing, but attention should be paid to the pressure resistance of the equipment.
• Operating Temperature: Usually between 5°C and 70°C or 10°C and 80°C. The temperature range needs to adapt to the usage environment. For example, in northern winters, low-temperature-resistant water tanks should be selected to prevent freezing damage.
• Wall Thickness: Ranging from 1 mm to 12 mm. The wall thickness directly affects the durability and cost of the water tank. Thicker-walled water tanks are more impact-resistant but heavier, so the choice should be based on the frequency of movement and transportation conditions.

Purchase Recommendations

1. Determine the type of water tank according to the usage scenario: For temporary events, lightweight models are preferred; for long-term fixed locations, large-capacity water tanks can be selected.
2. Check the working pressure and temperature parameters to ensure they match the local climate and water supply conditions.
3. Pay attention to brand reputation and after-sales service, and prioritize products that offer installation guidance or repair support.

The above information is based on market data updated on November 4, 2024. Parameters may vary slightly due to product iterations or regional differences, so it is recommended to confirm the latest specifications with the supplier before purchase.