How to Set Water Saving for Mobile Toilets

The water-saving settings for mobile toilets need to be customized according to the specific type of equipment. Here are the water-saving setting methods for common equipment:

Sanitary Toilet Induction Water Saver The setup process involves three steps: basic preparation, mode switching, and parameter adjustment.

• Basic Preparation: For models powered by municipal electricity, simply plug in to start. Battery-powered models require alkaline batteries to be installed, and ensure the inlet pipe valve is fully open to prevent the equipment from idling or being damaged due to insufficient water supply.
• Mode Switching: Activate the function mode by continuously pressing the function key for 5 seconds until the blue indicator light flashes rapidly; or trigger it through infrared induction or manual button pressing (refer to the equipment manual for specific methods).
• Parameter Adjustment:
  • Induction Distance: For sink scenarios, it is recommended to set it to 30-50 centimeters, and 80 centimeters for urinals to avoid false triggering due to excessive proximity or inability to sense due to excessive distance.
  • Water Discharge Duration: Control hand washing water discharge to 8-12 seconds per use, and suggest 15-20 seconds for toilet flushing mode to balance cleaning effectiveness and water-saving needs.
  • Extended Functions for High-End Models: Personalized parameters such as winter anti-freeze mode (to prevent pipe freezing), energy-saving mode (to reduce power consumption), and flow meter calibration (to ensure accurate water usage statistics) can be set via a mobile app.

Public Toilet Trough Automatic Water Saver 810W Main Unit Time and flushing parameters need to be set via a remote control:

• System Time Setting: Aim the remote control at the main unit, press the 'OK' button to unlock, and then set the year and month sequentially (adjust numbers using the plus and minus buttons, and save by clicking 'OK').
• Flushing Time Setting: Press the 'OK' button on the standby interface to enter the flushing time menu. By default, press the 'Menu' button to save as the off state; if activation is required, adjust the numbers and confirm.
• Timed Flushing Setting: Supports daily or weekly control cycles, allowing up to 20 timed tasks per day. For example, press the 'Plus' button on the standby interface to enter hour settings, then press 'Plus' again to switch to minute settings; distinguish days of the week through numerical displays (e.g., '1' represents Monday off). If no operation is performed for an extended period, it will automatically exit without saving parameters.

Water-Flush Mobile Toilet Optimization is needed from both flushing technology and water circulation aspects:

• Efficient Flushing System: Utilize air pressure assistance or vacuum suction technology to form a strong water flow with a small amount of water, thoroughly removing dirt and reducing single-use water consumption to less than one-third of traditional methods.
• Intelligent Induction Control: Judge usage status through infrared sensors to achieve 'flush upon departure' or quantitative flushing, avoiding continuous water flow due to improper manual operation or negligence.
• Water Treatment and Recycling: Fixed or semi-fixed units can be equipped with small-scale water treatment devices to treat sewage through sedimentation, filtration, and disinfection for reuse, forming a closed-loop circulation system to achieve zero sewage discharge and nearly zero freshwater consumption.