Mobile Toilet Specifications and Models

The specifications and models of mobile toilets are designed according to usage scenarios and functional requirements. Common types and dimensions are as follows:

I. Single-Compartment Mobile Restrooms Length: 1.2-1.5 meters, Width: 1.0-1.2 meters, Height: 2.2-2.5 meters, suitable for construction sites, small events, etc. Specific sub-specifications include:

1. Regular Single-Person Model: Length: 110cm, Width: 110cm, Height: 230cm, equipped with a basic flushing system and toilet paper holder, suitable for ordinary parks and temporary construction site locations.
2. Mini Single-Person Model: Length: 100cm, Width: 100cm, Height: 220cm, more compact in size, used in crowded small exhibitions, commercial streets, and other space-constrained scenarios.
3. Basic Single-Person Unit: Approximately 1.2 meters × 1.0 meter × 2.0 meters, includes a flushing system, toilet paper holder, and simple ventilation design, meeting basic usage needs.

II. Double-Compartment Mobile Restrooms Length: 2.4-3.0 meters, Width: 1.2-1.5 meters, Height: 2.2-2.5 meters, suitable for large events, tourist attractions, etc., where service efficiency needs to be improved. Sub-specifications include:

1. Regular Double-Person Model: Length: 180cm, Width: 110cm, Height: 230cm, with two independent compartments inside, allowing two people to use it simultaneously, reducing waiting times.
2. Basic Double-Person Unit: Approximately 1.5 meters × 1.2 meters × 2.2 meters, equipped with independent door locks, a flushing system, and small storage space, suitable for short- to medium-term event needs.

III. Multi-Functional/High-End Mobile Restrooms Length: 3.0-4.5 meters, Width: 2.0-2.5 meters, Height: 2.5-3.0 meters, suitable for high-end events, long-term fixed locations, etc., where comfort requirements are high. Sub-types include:

1. Eco-Friendly Model: Uses water-saving designs (such as foam sealing technology) or solar power, with more spacious dimensions, some equipped with sinks, hooks, and wet-dry separation areas.
2. Luxury Model: Approximately 2.0 meters × 1.8 meters × 2.5 meters, equipped with an aroma system, independent lighting, air conditioning, and smart sensor flushing devices, enhancing the user experience.

IV. Barrier-Free Mobile Toilets Dimensions: Length: 180cm, Width: 150cm, Height: 240cm, with reserved wheelchair turning space inside (diameter ≥ 1.5 meters), equipped with handrails, a toilet seat, and an emergency call device, suitable for large parks, scenic area entrances, etc., where barrier-free design specifications need to be met.

Design Considerations: The width of toilet stalls should be no less than 0.9 meters, and the height of sinks is recommended to be 0.8-0.9 meters; must comply with the relevant provisions of the 'Urban Public Toilet Design Standard' (CJJ 14-2016). Precautions: During transportation, consider road height and width restrictions (e.g., height not exceeding 2.5 meters); ensure the ground is level during installation to avoid tilting; when renting, choose the appropriate specifications based on the usage scenario, foot traffic, and budget.