Mobile Toilet Sink Position

The position of the sink in a mobile toilet can be achieved through various design methods. Here are some common and practical solutions:

1. Half-wall Design
   When installing a sink outside the toilet, a brick half-wall with a height of approximately 1 to 1.2 meters can be constructed at the junction between the sink area and the main toilet area. This design not only protects privacy by blocking the line of sight with the wall but also maintains the light permeability and air circulation of the space. The height of the half-wall is considered from an ergonomic perspective, preventing water splashes from reaching adjacent areas without causing a sense of oppression due to excessive height.

2. Glass Partition Design
   Install single-layer or double-layer tempered glass partition walls in the sink area. The glass material can be frosted, fluted glass, or other types that allow light to pass through but block the view. Glass partitions effectively block the line of sight while maintaining the lighting effect of the space, making them particularly suitable for small apartments or toilets with insufficient lighting. When installing, pay attention to the sealing between the glass and the floor to prevent water overflow.

3. Full-wall Design
   Completely separate the sink area from the living room or other functional areas by constructing a lightweight partition wall (such as a light steel keel gypsum board wall). The width of the wall is usually 15-20 centimeters more than the depth of the sink countertop. A mirror cabinet or open shelving can be installed above the wall, and drawer-type storage cabinets can be set up below to form a three-dimensional storage space. This design is suitable for scenarios with high privacy requirements and sufficient space.

4. Combination of Half-wall and Glass Design
   Adopt a composite structure with a 60-80 cm high brick half-wall at the bottom and a glass partition installed above. The half-wall can bear the weight of the sink countertop, while the glass part extends the visual height, ensuring structural stability and enhancing the sense of spatial hierarchy through material contrast. This design is commonly seen in modern minimalist style decorations.

5. External Sink Design
   Independently set up the sink in the corridor area outside the toilet entrance, achieving dry-wet separation by raising the floor by 5-10 centimeters or installing a water baffle. The external design can free up space inside the toilet, shorten the toilet route, and facilitate simultaneous use by multiple people. Pay attention to reserving the position of the drainage pipe and ensure that the countertop material is waterproof and moisture-proof.

6. Flexible Installation in Public Areas
   According to the characteristics of the apartment layout, the sink can be moved to public spaces such as the entrance hall, balcony, or dining area. For example, installing a sink at the entrance hall not only meets the need for disinfection upon entering but also utilizes the space below the countertop to design a shoe cabinet; installing a sink on the balcony facilitates washing clothes or plants. For such designs, plan the upper and lower water pipes in advance and choose a countertop material with excellent waterproof performance.