Mobile Toilet Model Making
There are mainly two ways to make mobile toilet models: professional drawing design and handmade DIY production.
Professional Drawing Design
Mufeng Network offers a rich collection of original drawings for mobile toilets (restrooms). One of them adopts a metal steel structure and is designed as a double-unit toilet, featuring advantages such as a small footprint and light weight. It is also equipped with lifting holes for easy movement and installation. Internally, it uses stainless steel plate cofferdams, and a dedicated sanitary bucket is used for recycling at the bottom, ensuring both hygiene and environmental protection. The drawing is editable and includes parameters, with a file size of 19.97mb. It was published on July 17, 2025, at 08:16, categorized under toilets, with software categorized as SolidWorks and SolidWorks 2018, and drawing formats of sldasm and sldprt. Additionally, Mufeng Network also provides design model drawings for outdoor mobile toilets, including front views, tree diagrams, line drawings, and three-view drawings, offering detailed design references for professionals to meet the design needs of mobile toilets in various scenarios.
Handmade DIY Production
A young man successfully made a mobile restroom using a water storage tank. First, he split the water storage tank in half with an angle grinder and fixed universal wheels at the four corners of a wooden board for easy movement. Next, he fixed wooden strips and self-tapping screws on the upper side of the tank to increase height, opened a doorway on the side of the water storage tank, installed sponge strips to form a door frame, and embedded plastic soft boards to create elevated walls. He placed the upper half of the water storage tank on top of the wooden strips to form a roof. Then, he painted the wooden strips with white waterproof paint and made a simple door by splicing waste honeycomb wooden boards with foam strips. He opened a hole at the bottom of the tank to install a drain pipe to form a floor drain, opened holes on the side and bottom of a plastic bucket to connect direct interfaces, and placed the plastic bucket on the roof to form a small water storage device, connecting it to a bathtub heater made of water pipes. He installed a three-way connection under the water inlet pipe to connect to a showerhead, placed a toilet and installed a water tank, fixing it with glass glue, and connected the drain pipe to a sewage bucket. Finally, he horizontally connected a water pipe to the three-way connection of the outlet pipe, extending it to the doorway as the water inlet pipe for the sink, and opened a hole in the door to install an interface. This handmade DIY production method has a low cost and is suitable for personal or small-scale production, but it requires certain hands-on skills and tool support.
