Mobile Toilet Cubicle Area
There is no unified standard for the area of a single cubicle in mobile toilets, and there are significant differences under different types and designs. The classification standards for urban public toilets can be used as a reference, and in some cases, the area of a single cubicle is roughly between 3 and 8.3 square meters.
Cubicle areas in the classification standards for urban public toilets: Urban public toilets are classified into three categories: Class I, Class II, and Class III, with different cubicle area indicators for each. Class I public toilets have a cubicle area indicator of 5 to 7 square meters per cubicle. These toilets are usually located in bustling commercial areas, major transportation hubs, and other areas with high requirements for sanitary facilities. They are well-equipped and have relatively spacious interiors, providing a good toilet environment for users. Class II public toilets have a cubicle area indicator of 3 to 4.9 square meters per cubicle. They are commonly found in general commercial areas and public activity venues, balancing basic functionality with space utilization efficiency. Class III public toilets have a cubicle area indicator of 2 to 2.9 square meters per cubicle. They are mostly located in areas with relatively low demand for sanitary facilities, such as ordinary residential areas and small parks, focusing on simplicity and practicality. Although these standards are not specifically for mobile toilets, they can be used as a reference to determine the cubicle area during the design of mobile toilets.
Areas of single cubicles in some mobile toilet cases: From specific mobile toilet cases, the网红集装箱移动厕所 (Internet-famous container mobile toilet) with six cubicles for both men and women covers an area of 18 square meters. By simple calculation, the average area per cubicle is approximately 3 square meters. The苹果仓移动厕所 (Apple-warehouse mobile toilet) with an eight-cubicle design covers an area of 24 square meters, with an average area per cubicle of approximately 3 square meters. There is also a multi-cubicle toilet covering an area of 50 square meters. If calculated based on 8 common cubicles, the area per cubicle is approximately 6.25 square meters; if calculated based on 10 cubicles, the area per cubicle is approximately 5 square meters; if calculated based on 6 cubicles, the area per cubicle is approximately 8.3 square meters. However, the area of a single cubicle in these cases may vary due to factors such as the overall design and functional configuration of the toilet.
