Mobile Toilet Cleaning

There are mainly two methods for mobile toilet cleaning: the eight-step cleaning method and professional cleaning procedures, as detailed below:

Eight-Step Cleaning Method:

1. Dust Removal: Use a broom to remove dust and cobwebs from the ceiling, walls, window screens, and lighting fixtures, avoiding dust contamination in other areas.
2. Wiping: Carefully clean high-touch areas such as doors, windows, sinks, partition boards, window sills, walls, and switches with a cloth. Note that the cloth should be used in different areas to prevent cross-contamination.
3. Scrubbing: For alkaline scale in squat toilets, sit toilets, and urinals, use a special brush with an acidic cleaner to thoroughly scrub. Stubborn stains can be treated after soaking.
4. Garbage Removal: Sweep garbage inside and outside the toilet, replace garbage bags promptly to prevent odor diffusion and bacterial growth.
5. Mopping: Use a mop to remove standing water on the floor, keep the floor dry to prevent slipping accidents, and regularly clean and disinfect the mop.
6. Inspection: Check whether facilities such as faucets, sensing devices, and coat hooks are intact. Report for repair immediately if any damage is found to ensure normal functionality.
7. Disinfection: Spray disinfectant on door and window handles, faucets, switches, etc., at least three times a day, and turn on deodorization equipment or light incense to reduce the risk of pathogen transmission.
8. Storage: Place tools such as mops, brooms, and cloths in the tool room to avoid clutter affecting toilet cleanliness.

Professional Cleaning Procedures:

1. Pre-treatment: Operators need to wear protective gear, isolate the work area, and check the liquid level indicator, drain valve, and ground leakage.
2. Emptying Waste: Connect the suction pipe to the drain outlet, start the vacuum pump to suck out the residue in the waste storage tank, then inject clean water for a second suction to remove residue from the tank walls.
3. Flushing: Use a high-pressure cleaner to flush the toilet walls, fixtures, and dead corners, and use a long-handled brush and cleaner to treat stubborn stains to ensure no residue remains.
4. Deep Disinfection: Cover all contact surfaces with disinfectant, maintain contact for 10-15 minutes, then rinse to kill pathogens.
5. Air Treatment: Use a雾化 (atomizing) deodorizer to neutralize odors and improve air quality.
6. Equipment Maintenance and Waste Disposal: Check components such as seals and exhaust fans, record any damage; reserve clean water in the waste storage tank and add biodegradable agents. Waste and wastewater must be discharged to designated facilities in compliance with regulations.