Mobile Toilet and Bathroom Cases

There are mainly two detailed ways to make mobile toilets and bathrooms, as shown in the following cases:

Making a Mobile Toilet Using a Water Storage Barrel

1. Basic Structure Construction: Take out a water storage barrel from home and split it in half with an angle grinder. Fix universal wheels at the four corners of a wooden board for easy movement. Use wooden strips and self-tapping screws to increase the height of the barrel, providing space for the subsequent installation of other components.
2. Wall and Roof Construction: Open a doorway on the side of the water storage barrel, install sponge strips to form a door frame, and embed plastic soft boards to create an elevated wall. Place the upper half of the water storage barrel on top of the wooden strips to form the roof, and apply white waterproof paint to the wooden strips to enhance aesthetics.
3. Door Making: Use foam strips to拼接 (assemble) discarded honeycomb wooden boards to make a simple door.
4. Drainage and Water System Installation: Open a hole at the bottom of the barrel and install a drainage pipe to form a floor drain. Open holes on the side and bottom of a plastic barrel and connect them with direct fittings. Place the plastic barrel on the roof to form a small water storage device and connect it to a shower head made of water pipes. Install a three-way fitting below the water inlet pipe and connect it to a shower head. Place a toilet and install a water tank, fixing it with glass glue. Connect the drainage pipe to a sewage barrel. Horizontally connect a water pipe to the three-way fitting of the outlet pipe and extend it to the doorway as the water inlet pipe for the sink. Install relevant hoses and open holes in the door.

Making a Mobile Toilet Using a Water Storage Tank and a Pallet

1. Mobile Base Preparation: Take out a plastic pallet and fix universal wheels at its four corners.
2. Water Storage Tank Processing and Assembly: Place a water storage tank collected from a garbage station on the pallet. Use an angle grinder to cut along the marked line on the top of the water storage tank to remove the top and form an open tank. Invert another open-top water storage tank and stack it on the first tank, fixing the outer frame with self-tapping screws.
3. Doorway and Drainage Opening Setting: Cut a rectangular opening in the outer frame of the water storage tank and cut the tank body according to the corresponding size to form a doorway. Open a hole on the internal floor of the water storage tank, insert an elbow from the bottom upwards, cut into a water pipe, and seal it with glue. Cut off the excess water pipe.
4. Sanitary Ware Installation: Align the toilet with the drainage opening and fix it with glue. Fix a water pipe on the wall buckle and install a faucet. Fix a pipe cap with screws below the faucet, connect the water pipe, and open a hole at the bottom as the outlet for the drainage pipe. Open a hole on the pipe cap, apply glass glue, and fix a sink made of a stainless steel basin. Connect the water inlet pipe to the toilet water tank, connect the shower hose, and install a shower bracket and a toilet seat. Install a spray-type shower head made of water pipes.
5. Door Installation: Bring a wooden board and fix hinges on the frame of the water storage tank. Fix the other side of the hinges to the wooden box to form the door of the toilet, and then install a door handle.