Mobile Toilet Assembly

The assembly steps for the mobile toilet are as follows. Follow the sequence to ensure stability and functionality:

1. Install the silicone anti-slip pads
Insert the silicone anti-slip pads into the grooves at the four corners of the bottom, ensuring a tight fit between the pads and the toilet body. This step enhances the friction between the toilet and the ground, preventing sliding or tipping during use, especially on smooth surfaces.

2. Align the upper and lower toilet bodies and secure the buckles
Align the upper and lower toilet bodies, ensuring the edges fit perfectly together. Press down on the upper toilet body until the buckles make a 'click' sound. Then, firmly pat around the toilet body to check if the buckles are fully locked. If the buckles are not securely fastened, it may cause the toilet bodies to separate or leak water, requiring re-pressing and adjustment.

3. Install the backrest and armrests

• Backrest installation: Align the protrusions at the bottom of the backrest with the holes on the back of the toilet body and press down vertically until fully embedded, ensuring no looseness.
• Armrest installation: First, secure the buckles on both sides of the backrest, then align the front armrest with the holes on the front of the toilet body and press to lock. The armrests should be kept level to avoid tilting and affecting comfort during use.

4. Install the seat ring and lid

• Seat ring installation: Align the buckles on both sides of the seat ring with the holes on the edge of the toilet body and press down vertically until the buckles are fixed. After installation, check if the seat ring is stable without wobbling or lifting.
• Lid installation: Align the buckles at the bottom of the lid with the corresponding positions on the seat ring and press until fully closed. Some models of lids may have a buffer device, so ensure the installation direction is correct.

5. Install the inner bucket and accessories

• Inner bucket installation: Place the inner bucket inside the toilet body, first secure the front handle, then adjust the position of the rear handle and press to lock. The inner bucket should maintain a seal with the edge of the toilet body to prevent odor leakage.
• Tissue box installation: Align the bottom of the tissue box with the holes on the side of the toilet body, press to secure, and then close the lid. If the model supports it, adjust the angle of the tissue box for easy access.

Precautions:

• Some models (such as the H80 basic model) may omit the armrests or seat ring, so adjust the steps according to the instructions.
• If an water-in system (such as a sprinkler or angle valve) is involved, additional water pipes need to be connected and tested for sealing. However, since this issue does not mention such functions, they are not included in the steps.
• After assembly, it is recommended to gently shake each component to confirm stability and place it in a dry and ventilated area for use.