Mobile Small Toilet Bathtub Size

The selection of bathtub sizes for mobile small toilets (small bathrooms) should be based on space and needs. Here are some common solutions and considerations:

I. Common Bathtub Types and Sizes

1. Mini Bathtub

   • Length: 1.2-1.4 meters, Width: about 0.7 meters.
   • Suitable for children or single users, commonly found in apartments or renovations of old housing units. Its compact design meets basic bathing needs while saving space.

2. Sitting Bathtub

   • Length: just over 1 meter, width: about 0.7 meters, floor area: about 0.7 square meters.
   • Features an built-in seat inside, allowing users to bathe in a semi-reclined or seated position, suitable for those with mobility issues or small spaces seeking comfort.

3. Sector Bathtub

   • Diameter: 1.2-1.5 meters, radius: can be controlled within 1 meter, floor area: less than 0.8 square meters.
   • Typically installed in bathroom corners, utilizing an arc design to minimize space waste, suitable for square or irregularly shaped small bathrooms.

4. Special Scenario Recommendations

   • If the bathroom area is ≤4 square meters, prioritize sitting or sector bathtubs to maximize space utilization.
   • For areas between 4-6 square meters, consider a standard 1.5-1.6 meter bathtub for a balance of comfort and practicality.

II. Installation Considerations

1. Embedded Bathtub Countertop Reservation

   • Embedded bathtubs need to fit closely with the countertop, with size errors ≤2 centimeters to avoid installation instability or water leakage.
   • It is recommended to plan the countertop material (such as tiles, marble) and edge treatment in advance to ensure aesthetics and durability.

2. Measurement of Handling Channels

   • Before installation, measure the dimensions of handling paths such as bathroom door width and stair corners to prevent the bathtub from being too large to enter the room.
   • If the bathroom is located on a high floor without an elevator, confirm in advance whether the bathtub can be disassembled for handling or transported by hoisting.

3. Drainage and Circuit Planning

   • A drainage outlet needs to be reserved at the bottom of the bathtub, and the slope should be reasonable (usually ≥2%) to avoid water accumulation.
   • If a massage bathtub or a model with lights is to be installed, plan the circuit location in advance and reserve a grounding protection device.

III. Other Recommendations

• Material Selection: For small bathrooms, it is recommended to choose acrylic or artificial stone bathtubs, which are lightweight, have good thermal insulation, and are easy to clean.
• Function Selection: If space is limited, consider forgoing complex functions such as massage and sprinklers, and choose a basic bathtub to reduce costs and space occupation.