Making Mobile Toilet Video
Mobile toilets can be made using materials such as chemical drums and water storage drums by following specific steps. Here is a detailed introduction to making mobile toilets with several different materials:
Making a mobile toilet using chemical drums: First, prepare two large chemical drums. Remove the steel bars on top and use a cutting machine to completely cut off the plastic lids. Then, place the two plastic drums upside down together and secure the upper and lower iron frames to ensure a stable structure. Next, cut according to the size of the door frame and use rectangular iron sheets to fix the gaps to prevent water leakage. After that, drill holes to install PVC pipes, toilets, and water tanks, and connect the water inlet pipes to ensure a water supply. You can also use PVC pipes to make a showerhead for showering, adding functionality to the toilet. Finally, install a wooden door and handle, and connect the drainage outlet to the septic tank to complete the entire mobile toilet construction.
Making a mobile toilet using a water storage drum: Take out a water storage drum from home and split it in half with an angle grinder. Fix universal wheels at the four corners of a wooden board for easy mobility. Use wooden strips and self-tapping screws to fix them on the upper side of the drum to increase the height and make the interior space more spacious. Cut an opening on the side of the water storage drum for the door, install sponge strips to form the door frame, and embed plastic soft boards to create raised walls for better privacy. Place the upper half of the water storage drum to form the roof and apply white waterproof paint for both aesthetics and waterproofing. Assemble honeycomb wooden boards to make a door for easy opening and closing. Drill a hole at the bottom of the drum to install a drainage pipe to form a floor drain for easy drainage. Drill holes on the side to connect direct joints and place a plastic drum to form a water storage device for storing water for handwashing or showering. Connect a water pipe-made bath heater to provide a warm environment. Install a toilet and water tank, and connect the drainage pipe to the sewage drum to ensure smooth sewage discharge. Connect a water pipe at the three-way joint of the outlet pipe and extend it to the door as the water inlet pipe for the handwashing basin to complete the toilet's functions.
In addition, there is a method of making a mobile toilet using a water storage tank and a pallet, but the specific construction process is not detailed. During the actual construction process, it is necessary to reasonably plan the spatial layout according to the selected materials and actual needs to ensure the practicality and comfort of the mobile toilet.
