Make a Home Mobile Toilet by Yourself

There are mainly two common methods for making a homemade mobile toilet: using a water storage tank and using a water storage tank with a pallet. Here are the specific introductions:

Making with a Water Storage Tank

1. Basic Structure Construction: Take out a water storage tank from home and use an angle grinder to split it in half lengthwise. Prepare a wooden board and fix universal wheels at its four corners to facilitate the movement of the entire toilet structure. Then, take several wooden strips and fix them to the upper side of the tank with self-tapping screws to increase the height and provide space for installing other components later.
2. Door Frame and Wall Construction: Cut an opening on the side of the water storage tank for the door. Install sponge strips on both sides of the opening to form the door frame. The sponge strips can provide a certain degree of sealing and cushioning. Then, insert plastic soft boards between the wooden strips to form an elevated wall, enhancing the privacy and stability of the toilet.
3. Roof and Door Construction: Place the upper half of the water storage tank on top of the wooden strips to form the roof. Paint the wooden strips with white waterproof paint, which not only serves as decoration but also prevents the wood from getting damp and rotting. Use foam strips to拼接 (Note: '拼接' here means 'join together' or 'assemble'. In English, it can be translated as 'assemble' or 'piece together'. Since we're describing a process, 'assemble' is more appropriate.) assembled discarded honeycomb wooden boards to make a simple door that meets basic opening and closing needs.
4. Drainage and Water Supply System Installation: Cut a hole at the bottom of the tank and install a drain pipe to form a floor drain for easy sewage discharge. Cut holes on the side and bottom of the plastic tank and install direct connectors. Place the plastic tank on the roof to form a small water storage device for storing toilet-flushing water. Connect the bath heater made of water pipes. Install a three-way connector below the water inlet pipe and connect it to a showerhead to meet bathing needs. Place a toilet and install a water tank, fixing it with glass glue to ensure the toilet is stable. Connect the drain pipe to the sewage tank. Horizontally connect a water pipe to the three-way connector of the outlet pipe and extend it to the door as the water inlet pipe for the sink, achieving reasonable sewage discharge and water circulation utilization.

Making with a Water Storage Tank and a Pallet

Take out a plastic pallet and fix a universal wheel at each of its four corners with tools to make the pallet movable. However, this method only mentions the making of the mobile base. For other functional components of the toilet, such as the toilet bowl, water storage, and drainage systems, no detailed descriptions are provided. Further combination with other materials and methods may be required to complete the making of the entire mobile toilet.