Linxia Mobile Toilet Specifications

Linxia mobile toilets come in a full range of specifications and can be customized as needed, with external dimensions made according to the drawings. The following is a detailed introduction from three aspects: structural units, modular structures, and common standards:

Size Characteristics of Structural Units

1. Frame: Made of lightweight steel welded into shape, it is detachable. This design ensures structural stability while facilitating transportation and installation, allowing for flexible adjustments based on actual needs.
2. Wall Panels: The materials used are aluminum alloy composite panels or fiberglass panels, with thicknesses ranging from 5 to 8 millimeters. Aluminum alloy composite panels offer advantages such as light weight, high strength, and corrosion resistance; fiberglass panels have good weather resistance and decorative properties, meeting usage requirements in different environments.
3. Roof: Mostly designed with a single slope, this design is conducive to drainage, preventing water accumulation from damaging the toilet, and also reducing wind resistance to a certain extent, improving the toilet's stability.
4. Internal Equipment: Includes fixed components such as stainless steel squat toilets, plastic water tanks, and mechanical exhaust fans, all connected through standardized interfaces. Stainless steel squat toilets are durable and easy to clean; plastic water tanks are lightweight and can meet basic water storage needs; mechanical exhaust fans can effectively improve the air quality inside the toilet.

Size-Related Characteristics of Modular Structures

1. Ease of Assembly and Disassembly: A single person can complete the entire disassembly within 4 hours, and all components can be loaded into a standard truck for transportation. This enables rapid deployment and relocation of mobile toilets, making them suitable for various temporary or short-term usage scenarios.
2. Environmental Adaptability: No concrete pouring is required for the foundation; only simple ground leveling is needed, allowing deployment on terrain with a slope of less than 5 degrees. For areas with variable terrain, the chassis height can be adjusted to accommodate different ground elevations, with an adjustment range of 15 to 40 centimeters, greatly enhancing its applicability in different environments.
3. Ease of Maintenance: Damaged components can be replaced individually without the need for complete disassembly. Replacing a single wall panel takes an average of about 20 minutes, reducing maintenance costs and time.

Reference for Common Mobile Toilet Size Standards
For basic mobile toilets, the minimum size of a single-person unit (independent type) is approximately 1.2 meters in length, 1 meter in width, and 2.2 meters in height, with a conventional size of about 1.5 meters in length, 1.2 meters in width, and 2.3 meters in height. For double-person units (with two toilet stalls), the conventional size is about 2.5 meters in length, 1.5 meters in width, and 2.3 meters in height. Among functional mobile toilets, accessible toilets require a length of at least 2 meters, a width of 1.5 meters, and a height of 2.4 meters; maternity/family toilets have dimensions of about 2.2 meters in length, 1.8 meters in width, and 2.4 meters in height. For mobile toilets in special scenarios, such as multi-unit (4 - 6 toilet stalls) temporary toilets for scenic spots or large events, the length is approximately 5 - 8 meters and the width is 2 meters.