Light Steel House Prefabricated Components
Light steel house prefabricated components are a building system centered around light steel keels synthesized from hot-dip galvanized aluminum steel strips through cold rolling. They are constructed using factory prefabrication and on-site assembly methods, offering significant advantages in efficiency, environmental protection, cost-effectiveness, and safety. The following analysis covers materials, production methods, core advantages, and basic components:

Materials and Production Methods
The core material of light steel house prefabricated components is light steel keels synthesized from hot-dip galvanized aluminum steel strips through cold rolling, which exhibit high strength and strong corrosion resistance. Production adopts a "factory prefabrication + on-site assembly" model, where components are standardized in factories and then transported to the site for assembly. Alternatively, mobile factories can be used for on-site production, reducing transportation costs and time losses. For example, in a 68-square-meter fully furnished house project in Zigong, Sichuan, the on-site assembly of components took only 30 days, shortening the construction period by 50% compared to traditional buildings.
Core Advantages
- Construction Efficiency and Cost: The construction period is reduced by 50% compared to traditional buildings, with a comprehensive cost reduction of 15%-20%. Prices are 20% cheaper than ordinary brick houses. Material wastage is only 3%, and 85% of materials can be recycled, reducing energy consumption by 40% compared to traditional construction methods.
- Energy Efficiency and Environmental Protection: The exterior walls are filled with glass fiber wool for thermal insulation, with an insulation effect twice that of brick walls. Breathable membranes are used to regulate humidity, enhancing living comfort. The roof supports the integration of photovoltaic tiles, further improving energy efficiency by 40%.
- Safety and Space Utilization: The main structure is earthquake-resistant up to magnitude 9 and wind-resistant up to level 12, significantly safer than traditional buildings. Its self-weight is only one-fifth that of brick-concrete structures, increasing usable space by 15% (e.g., a 68-square-meter house gains an additional 15% of space).
Basic Component System
- Foundation System: After marking the foundation lines, a moisture-proof layer and ground keels are laid and fixed with chemical anchors to meet the needs of lightweight structures.
- Wall Structure: Light steel ribbed beams and columns work together with the enclosure structure for load-bearing. Corners are fixed to the foundation and adjacent walls, with OSB boards nailed to the exterior, moisture-proof and breathable membranes laid, and red cedar siding or cement carved panels used to reduce costs.
- Floor System: Trusses or 40mm keels are used for construction. In the case study, 140 keels were used as the floor slab, with the installation method for the second-floor walls being the same as for the first floor.
- Roof System: It is recommended to use cranes for installing roof beams and the roof, laying asphalt waterproof membranes, and supporting the integration of photovoltaic tiles, balancing construction efficiency and energy-saving needs.
Light steel house prefabricated components achieve a balance between construction efficiency, environmental performance, and cost-effectiveness through modular design and industrial production, representing an important direction for modern green buildings.




