Inner Mongolia Container Mobile House

Inner Mongolia container mobile houses are modular buildings transformed from containers, featuring mobility, customizability, and rapid installation. They are widely used in scenarios such as construction site dormitories, temporary offices, and wilderness camps, with business coverage extending to multiple locations in Inner Mongolia, including Baotou, Hohhot, and Ordos.

I. Core Components and Materials

The core structure of container mobile houses consists of a steel frame and enclosure panels. The main steel frame often employs national standard Q235 galvanized square tubes with a wall thickness of no less than 1.5 millimeters, ensuring adequate anti-corrosion and anti-rust treatment for a service life of over 15 years. Wall and roof panels typically use double-layer colored corrugated steel sheets filled with 50-100 mm thick rock wool or polyurethane insulation materials, balancing thermal insulation and structural strength. Some enterprises, considering the northern climate characteristics, apply a high-weather-resistant polyester resin coating on the outer layer and add a moisture-proof aluminum foil layer on the inner layer, effectively reducing the probability of condensation.

II. Functional Characteristics and Adaptability

1. Modular Design: The houses are based on standard containers as units, enabling rapid assembly and disassembly through bolt connections. They support single-story, double-story, or multi-story stacking to accommodate different spatial requirements. For example, when stacking two stories, 6 mm thick square steel columns with additional stiffeners are used, increasing the compressive strength by approximately 50%.
2. Thermal Performance Optimization: In response to the severe cold in Inner Mongolia during winter, a three-layer structure is adopted: an outer layer of 0.6 mm thick galvanized sheet to resist wind and sand, a middle layer of 80-100 mm rock wool for insulation, and an inner layer of PVC-coated steel sheet to reduce thermal radiation. Some products also incorporate an elevated layer at the bottom of the container to block cold bridges from the ground.
3. Spatial Function Zoning: The fixed dimensions (e.g., 3 meters × 6 meters) necessitate a functional overlay strategy in design. For instance, kitchens and bathrooms are integrated into wet areas, while living and sleeping areas achieve day-night functional switching through convertible furniture.

III. Application Scenarios and Costs

Container mobile houses in Inner Mongolia are primarily used in scenarios such as temporary housing on construction sites, wilderness camps, and urban movable residences. The single lifting and transportation cost is approximately 15-25 yuan per kilometer. Upon arrival at a new site, they only require connection to water and electricity for immediate use, with relocation and resettlement costs significantly lower than those of traditional buildings. Construction costs vary depending on the configuration, with ordinary construction site housing costing approximately 500-1000 yuan per square meter, and higher-quality movable houses potentially costing more.