Volver al blog
Artículo
How to Stick Container House Stickers
Admin 15 de septiembre de 2026
The sticking of container house stickers can refer to the sticking method of large advertising vehicle stickers. The specific steps are as follows:

Prepare Tools and Materials
- Tools: Watering can (or an ordinary spray bottle), hand soap, a scraper (which can be homemade using a 5-millimeter-thick and 20-centimeter-long acrylic sheet, with the edges smoothed to avoid damaging the sticker), and a clean soft cloth.
- Materials: Container house stickers, clean water.
Specific Sticking Steps
- Prepare the spray bottle solution: Fill the spray bottle halfway with water, then add five or six drops of hand soap. Shake well to ensure the hand soap is fully dissolved in the water.
- Clean the sticking area: Use a clean soft cloth to thoroughly clean the area of the container house where the sticker will be applied, ensuring there is no dust, grease, or other impurities on the surface. Then, evenly spray the prepared solution onto this area, applying more to ensure the surface is well-moistened.
- Handle the sticker: Carefully peel off the backing paper of the sticker, taking care not to let the adhesive part on the back of the sticker stick to itself. Next, evenly and comprehensively spray the solution onto the back of the sticker, ensuring there are no dry spots.
- Stick the sticker: After confirming that both the sticking area on the container house and the sticker have been sprayed with the solution, carefully apply the sticker. If the position is not correct, you can peel it off and reposition it at any time, as the sticker will not stick firmly immediately when there is water present.
- Scrape off the water: Once the sticker is in the correct position, use the prepared scraper to slowly scrape from one end of the sticker to the other, removing as much water as possible between the sticker and the surface of the container house. The cleaner the scraping, the more firmly the sticker will adhere.
- Check and handle: Check around the sticker for any air bubbles or lifted edges. If any are found, use the scraper to gently smooth them out again, ensuring the sticker is tightly adhered to the surface of the container house.
Relacionados




