How to Remove Mobile Plastic Toilet

The removal of mobile plastic toilets requires specific operations based on their types, with different steps for household and public/commercial scenarios, and strict adherence to regulations to ensure safety.

I. Household Mobile Plastic Toilets (Without Shower)

1. Preparation Before Removal

   • Empty the waste tank of any waste, deodorizers, or coagulants to prevent environmental contamination from residues.
   • Spray the toilet surface with disinfectant, let it sit for 5 minutes, and then wipe it down to reduce the risk of bacterial spread.

2. Component Separation Steps

   • Release the Fixing Device: Most toilets are connected to the bracket via a rotating snap-fit (marked 'PUSH'). Press the snap-fit and rotate it counterclockwise by half a turn to separate.
   • Remove the Hose: Use a flat-head screwdriver to gently pry open the plastic retaining ring of the exhaust pipe or splash-proof hose at the back, and pull the hose straight up.
   • Separate the Seat Assembly: Flip up the toilet seat, use needle-nose pliers to grip both ends of the metal shaft of the hinge, and slowly pull it out. Save the rubber shock absorber for future use.
   • Fold the Bracket: Some models (such as Jinshukang, Anshubao) have a quick-release button at the bracket connection. After removal, the bracket can be folded into a 70×40cm flat shape for easy transport.

3. Subsequent Treatment

   • Soak the screw holes in a 1:50 solution of 84 disinfectant for 20 minutes to prevent odors from residual dirt.
   • Components made of a combination of eco-friendly PP material and ABS engineering plastic can be sorted and placed in community-designated plastic recycling bins.
   • For models that cannot be disassembled, call the manufacturer using the production number stamped on the bottom of the toilet. Some companies offer free on-site recycling services.

II. Mobile Toilets with Showers (Public/Commercial)

1. Disconnect Water Supply and Drainage

   • Close the main water supply valve and drain all residual water from the toilet to prevent leaks during removal.
   • Use a pipe wrench or spanner to loosen the nuts connecting the sewage pipe, water inlet pipe, and equipment, and disconnect the pipe connections.

2. Remove Modular Components

   • Shower Area: Disconnect the shower wastewater pipe connection, remove the fixing slots or screws, and take down the entire shower enclosure.
   • Changing Area/Storage Area: Separate the connection structures between modules and disassemble the walls, floors, and other附属 (accessory) components in reverse order.
   • Toilet/Commode: Use a spanner to remove the nuts connecting the seat and water tank, flip it over, and remove the toilet body.

3. Handle Accessories and Details

   • Clean and sort removable accessories such as sinks, mirrors, and paper towel holders for storage.
   • Be careful to protect the floor/walls during removal to avoid damage from improper tool use.

III. General Precautions

• Wear protective clothing, gloves, and other protective gear before operation to avoid contact with waste or sharp components.
• For complex structures (such as built-in equipment), it is recommended to contact professionals to prevent damage to the toilet body or surrounding facilities.
• The installation and removal of mobile toilets must be carried out in strict accordance with regulations to ensure safety and reduce environmental pollution.