How to Make a Mobile Toilet

There are various ways to make a mobile toilet, and you can choose an appropriate method based on different needs and materials. Here are some specific production methods:

Making with a Water Storage Barrel

First, prepare a water storage barrel and use an angle grinder to split it in half lengthwise. Then, fix universal wheels at the four corners of a wooden board for mobility. Use wooden strips and self-tapping screws to increase the height of the barrel and create an opening on the side. Install sponge strips to form the door frame, embed plastic soft boards to create the walls, and use the upper half of the water storage barrel as the roof. Make a hole at the bottom of the barrel, install a drain pipe to form a floor drain, and drill a hole on the side to connect a direct joint. Install a bath heater, toilet, and water tank made from water pipes, and connect the drain pipe to the sewage tank. Extend the water pipe to the entrance as the inlet pipe for the sink, and finally install a simple door to complete the production.

Making with a Water Storage Tank and a Pallet

Fix universal wheels at the four corners of the bottom of a pallet and place a recycled water storage tank on it. Use an angle grinder to cut the top of the water storage tank to create an open tank. Stack two tanks and fix them with self-tapping screws. Cut rectangular openings on the outer frame and the body of the water storage tank to serve as the entrance. Make a hole in the interior floor, install a drain elbow, fix the toilet, and seal it with glue. Use wall clips to fix water pipes and install a faucet, and connect a stainless steel basin below to make a sink. Connect the inlet pipe of the toilet tank and the shower hose, install a showerhead-style shower, and a toilet seat. Fix hinges on the frame of the water storage tank to connect wooden boards as the door, install a door handle, and complete the production.

Other Types of Mobile Toilets

Mobile toilets can also be classified according to their structural form, mobility method, and sewage treatment method. In terms of structural form, they can be divided into single-structure mobile toilets and composite-structure mobile toilets. In terms of mobility, there are hoisting and handling mobile toilets, as well as powered and trailer-mounted mobile toilets. In terms of sewage treatment, there are water-flushing and waterless suction mobile toilets, and circulating water-flushing mobile toilets. These different types of mobile toilets can be selected and produced according to specific needs and usage scenarios.