How to Fold a Mobile Toilet Tent

The folding of a mobile toilet tent can be carried out according to the following steps:

1. Clean the tent surface
   Use a small amount of laundry detergent and a damp cloth to wipe the tent, removing surface stains or dust. This step prevents stains from penetrating into the fabric during folding and reduces the risk of material aging caused by dirt during subsequent storage. When wiping, ensure even pressure to avoid scratching the tent's waterproof coating.

2. Fold the top poles
   Fold the two support poles at the top of the tent towards the center to bring them together. Hold both ends of the poles with both hands and apply gentle pressure to avoid bending or deforming the poles. If the poles are segmented, check that the connections are secure before folding in the designed direction.

3. Fold the bottom poles
   Treat the two bottom support poles in the same manner, ensuring they are parallel and aligned with the top poles. At this point, the overall structure of the tent has been initially reduced, but maintain frame stability to prevent the poles from slipping and causing the tent to collapse.

4. Erect the tent body
   Hold the folded pole assembly with both hands and stand the tent upright vertically. Pay attention to the flatness of the ground in this step to prevent the tent from tipping over and damaging the poles or fabric. After erecting, gently shake the tent to check that the pole connections are secure.

5. Fold the top poles towards the back of the hand
   Further press the already folded top poles towards the back of the hand to make them fit closely against the tent body. Control the pressure in this action to avoid the poles rebounding and causing injury. If the poles are made of elastic material, press the middle of the poles first and then gradually fold them in.

6. Merge the two halves of the tent
   Fold the left and right halves of the tent towards the center to completely wrap the fabric around the poles. Align the edges when folding to prevent the fabric from misaligning and causing difficulties in subsequent storage. If the tent is designed with fasteners or straps, use them in this step to maintain the folded state.

7. Compress and seal for storage
   Flatten the folded tent as a whole, expel the internal air, and place it in a dedicated storage bag. Before sealing, check that the zipper or fasteners on the bag opening are intact to ensure the tent remains dry and free from dust during storage. If storing for a long time, place desiccants inside the bag to extend the material's lifespan.

Precautions:

• Ensure the tent is completely dry before folding to prevent mildew;
• Keep away from sharp objects during operation to prevent scratching the tent fabric;
• If the poles get stuck, do not force them. Instead, check for obstructions at the connections.