How to Clean the Gap of the Movable Toilet Door

You can refer to the following two methods for cleaning the gap of the movable toilet door, and choose the appropriate method according to the degree of dirt:

Method 1: Straw Cleaning (Suitable for stubborn dirt in the gap)

1. Tool Preparation: Select a straw of moderate thickness and cut one end into a bevel to form a pointed tip (similar to a needle) for easy insertion into the gap. Also, prepare two cotton swabs and a small amount of alcohol (optional).
2. Operation Steps:
   • Insert the pointed tip of the straw into the gap of the sliding track and slowly push it forward along the direction of the gap, using the pointed tip to pick out hair, dust, and other dirt stuck inside.
   • Use a cotton swab to swipe horizontally inside the gap to clean up the remaining fine dust. If there is still floating dust on the surface of the gap, you can dip the cotton swab in a small amount of alcohol and wipe it. Alcohol can dissolve oil stains and evaporate without leaving any residue.
3. Precautions: Avoid using excessive force during operation to prevent the pointed tip of the straw from breaking and leaving residues. Alcohol is only for surface cleaning and should not be poured into the gap in large quantities.

Method 2: Daily Simple Cleaning and Deep Unclogging (Handle according to different scenarios)

1. Daily Maintenance:
   • Soft-bristled Brush Cleaning: Use a soft-bristled brush (such as an old toothbrush) to brush off floating dust, hair, and other debris along the gap of the sliding track to prevent dust accumulation.
   • Vacuum Cleaner Suction: Use the small suction head of a vacuum cleaner to aim at the gap and suck up the remaining fine particles to reduce secondary pollution.
   • Wet Cloth Wiping: Wipe the surface of the sliding track with a拧干的 (wrung-out) wet cloth to ensure no standing water remains (pay special attention to rust prevention for metal sliding tracks).
2. Deep Cleaning (Suitable for long-term uncleaned or severely clogged situations):
   • Remove the Sliding Door: Lift the movable door off the sliding track to facilitate thorough cleaning of the inside of the gap.
   • Solution Scrubbing: Dip an old toothbrush in a solution of dishwashing detergent or baking soda mixed with water and scrub along the gap repeatedly, focusing on cleaning the areas where hair accumulates in the corners (baking soda can neutralize acidic dirt, and dishwashing detergent can remove oil stains).
   • Rinsing and Drying: Rinse the sliding track with clean water and then thoroughly dry it with a dry cloth. For metal sliding tracks, you can spray a small amount of anti-rust lubricating oil to extend their service life.
3. Taboos and Lubrication:
   • Avoid using strong acid or strong alkali cleaners (such as 84 disinfectant and toilet cleaner) to prevent corrosion of the sliding track material.
   • Do not scrape with hard objects such as steel wool to avoid scratching the surface.
   • If the sliding track is severely clogged, you can apply a small amount of talcum powder or special track lubricating oil after cleaning to reduce friction.