Hanshou Container House Design
The design of container houses in Hanshou needs to combine functional requirements, structural safety, material selection, and environmental adaptability. Here are the specific design points:
1. Structural Design Container houses usually adopt a modular design, using a single or multiple standard containers (such as 20-foot or 40-foot ones) as the basic units. The structure must meet strength requirements, for example, using a steel frame that is bent and welded as a whole to ensure stability and durability. For special scenarios like medical use, reference can be made to the shelter design in the medical equipment procurement project of Hanshou County People's Hospital. It adopts a single-container structure with external dimensions of no less than 1370029802896mm. ISO standard container corner fittings for lifting are installed at the four corners for easy transportation and assembly. Independent support frames (such as those made of 4mm thick high-quality steel) need to be set up inside. The floor should use composite flooring or fire-resistant and antibacterial materials (such as 28mm composite flooring and 2mm PVC roll flooring) to meet different functional requirements.
2. Functional Zoning and Layout Divide functional areas according to the usage scenario. For example, medical shelters are strictly designed according to the zoning of PCR laboratories, including reagent preparation areas, specimen preparation areas, product amplification and analysis areas, and are equipped with independent buffer rooms, decontamination rooms, and equipment rooms. Ordinary container houses can follow a similar logic to divide into living, office, or storage areas. These areas are connected through pass-through windows or interlocking doors to ensure the convenience of item transfer and personnel movement. The airflow design should be unidirectional to avoid cross-contamination, and the pressure gradient should decrease step by step according to functional requirements.
3. Material and Equipment Selection Materials should balance durability and environmental friendliness. The exterior uses a steel structure, and the interior partition walls can use laboratory-specific antibacterial purification panels (with a thickness of no less than 50mm). The internal and external corners are equipped with cleanroom-specific arc-shaped aluminum profiles to reduce sanitary dead spots. Doors and windows should have strong sealing properties, such as stainless steel exterior doors with access control systems, steel clean and sealed doors with glass observation windows, and interlocking devices for the two doors in the buffer room. In terms of equipment, 5G wireless networks, LED clean lights, ultraviolet light disinfection systems, and smoke alarm detectors can be integrated to enhance intelligence and safety.
4. Environmental Adaptability The design should take into account the climatic conditions in Hanshou County (such as humidity and temperature). For example, the floor material should be moisture-proof and wear-resistant (such as PVC rolls), and the walls should be antibacterial and easy to clean. If used outdoors, enhanced waterproofing and sun protection treatments are required, such as increasing the drainage slope on the roof and applying anti-corrosion coatings on the outer layer. In addition, container houses can refer to the manufacturing experience of container gantry cranes at Hanshou South Railway Station's freight yard to optimize the structure to adapt to high-temperature or high-humidity environments and ensure long-term stability.
5. Modularity and Expandability The advantage of container houses lies in their ability to be quickly assembled and expanded. Interfaces should be reserved during the design process to facilitate the connection of multiple containers or functional upgrades. For example, vertical or horizontal expansion can be achieved through standardized corner fittings, or the internal layout can be flexibly adjusted through modular interiors (such as removable partition walls) to meet usage requirements at different stages.
