Dimensions of Guangzhou Water-Saving Mobile Toilets

The dimensions of Guangzhou water-saving mobile toilets vary depending on the type and configuration, with common specification ranges as follows:

I. Dimensions of Shunyu Environmental Protection and Huiyue Brand Mobile Toilets The mobile toilet specifications of Shunyu Environmental Protection are 1.1 meters (width) × 1.1 meters (depth) × 2.3 meters (height). The mobile toilet dimensions of Huiyue brand are the same, labeled as 110 × 110 × 230 centimeters (i.e., 1.1 meters × 1.1 meters × 2.3 meters). These dimensions are typical for single-unit mobile toilets and are suitable for scenarios with low pedestrian density, such as temporary events, construction sites, or small public areas. Their compact design facilitates easy transportation and rapid deployment, while the interior space meets basic usage requirements.

II. General Dimension Range for Single-Unit Mobile Restrooms The external dimensions of single-unit mobile restrooms typically range from 1.0 to 1.5 meters in width, 1.2 to 2.0 meters in depth, and 2.2 to 2.8 meters in height, with corresponding interior dimensions of 0.8 to 1.2 meters in width, 1.0 to 1.5 meters in depth, and 2.0 to 2.5 meters in height. This range covers designs with different functional requirements, for example:

• Basic Model: The external dimensions are close to 1.1 meters × 1.1 meters × 2.3 meters, with an interior space of approximately 0.9 meters × 0.9 meters × 2.1 meters, suitable for single-person use;
• Extended Model: The depth may increase to 1.5 to 2.0 meters, and the height may be raised to 2.5 to 2.8 meters to accommodate storage cabinets, sinks, or ventilation equipment, enhancing user comfort.

III. Dimension Differences in Multi-Functional Mobile Public Toilets Most basic models of mobile public toilets have dimensions of 1.1 meters in length, 1.1 meters in width, and 2.3 meters in height, but some models have been adjusted for special needs:

• Extended Length: The length can reach over 1.5 meters to increase interior activity space or provide dual toilet compartments;
• Management/Disabled Compartment: Dimensions may increase to 2.46 meters in length and 1.4 meters in width, equipped with barrier-free facilities (such as handrails and low-level sinks) or storage areas for management tools, meeting barrier-free design specifications.

IV. Key Considerations for Dimension Selection

1. Usage Scenario: Compact models (e.g., 1.1 meters × 1.1 meters) are preferred for temporary events, while extended models are suitable for long-term fixed locations;
2. Functional Requirements: Larger spaces are needed for disabled compartments and management rooms, while basic models focus on cost savings;
3. Transportation Restrictions: Dimensions must comply with road transportation regulations (e.g., width not exceeding 2.5 meters) to avoid over-limit issues.

The dimension design of Guangzhou water-saving mobile toilets needs to balance functionality, economy, and applicability. Users can refer to the above ranges for selection based on actual needs.