Fuzhou Construction Site Portable Toilets

The use and management of portable toilets at construction sites in Fuzhou should adhere to the following regulations:

I. Pre-lease Preparations Construction units should select appropriate toilet types based on the scale of the construction site, the construction period, and the number of personnel. The area of a single toilet cubicle must not be less than 1.2 square meters, and basic facilities such as sinks, toilet paper, and hand sanitizer should be provided. When leasing, a standardized contract should be signed with the supplier to clarify the responsibilities of both parties (such as equipment maintenance and fault handling) and the scope of services (such as waste removal frequency and disinfection frequency). Local suppliers in Fuzhou, such as Qianmai Portable Toilets and Shanghai Changjiu Industrial Co., Ltd., can provide 24-hour services and short- and long-term leasing plans.

II. Installation and Placement Requirements Portable toilets should be placed away from construction dust areas, water source protection zones, and living areas, maintaining a safe distance of more than 5 meters from areas such as canteens and dormitories. During installation, ensure that the ground is level and the toilet body is stable, and set up a conspicuous sign indicating 'Temporary Construction Toilet'. For flush toilets, plan the drainage pipes in advance; for dry toilets, reserve a waste removal passage.

III. Daily Use and Management

1. Cleaning and Disinfection: Assign dedicated personnel for daily cleaning, disinfecting once in the morning and once in the evening, and increase inspection frequency during peak periods to ensure no blockages or odors in the toilets.
2. Equipment Maintenance: Regularly inspect the electrical circuits and flushing systems of the toilet facilities, report for repairs immediately upon discovering damage, and prohibit construction personnel from disassembling or modifying the equipment without authorization.
3. Waste Removal: The water consumption per flush for flush toilets should not exceed 3 liters; dry toilets should have their waste removed every 24 hours to prevent accumulation.

IV. Compliance and Acceptance All portable toilets must comply with the 'Standards for the Installation of Urban Environmental Sanitation Facilities', provide product quality inspection reports, and the leasing unit must have environmental protection department registration qualifications. After use, disinfect the inside and outside of the toilets to prevent the spread of pathogens.

V. Response to Special Weather Conditions During the rainy season, strengthen inspections of anti-slip and drainage facilities; during winter, take anti-freezing measures (such as wrapping water tanks and pipes), prohibit stacking debris or conducting open-flame operations inside the toilets to avoid safety accidents.

VI. Safe Use Principles Construction personnel should adhere to the principle of 'civilized toilet use', prohibiting the disposal of construction waste or flammable and explosive materials into the toilets. In case of equipment failure, immediately contact the leasing party for repairs to ensure safe use.