Factory Mobile Toilet Specifications

Factory mobile toilets come in a variety of specifications, with common size ranges covering different types from single-person use to multi-person combinations. They can be specifically categorized as follows:

1. Single Mobile Toilet Specifications
Single mobile toilets are usually independent structures, suitable for single-person use or scenarios with limited space. Common sizes include:

• 1.1m × 1.1m × 2.3m: A basic design with compact interior space, capable of accommodating a standard squat toilet or sit toilet, suitable for temporary events or construction sites.
• 1.3m × 1.3m × 2.3m: With slightly increased width and length, the interior activity space is more ample, allowing for the configuration of a small sink or storage cabinet.
• 1.06m × 1.07m × 2.5m: The height is increased to 2.5m, improving ventilation, suitable for environments with high air circulation requirements.
• 1.2m × 1.7m × 2.5m: The length is extended to 1.7m, enabling the accommodation of more complex facilities, such as barrier-free handrails or baby care stations.
• 1.16m × 1.4m × 2.9m: With a height close to 3m, the sense of space is stronger, suitable for scenarios requiring the installation of an exhaust system or large water storage tanks.

2. Multi-Toilet Combination Mobile Toilet Specifications
For high-traffic scenarios, factories often produce prefabricated combination toilets, enabling rapid installation through modular design. Typical specifications are:

• 2.5m × 6.5m: The overall structure is divided into three independent toilet compartments, with each compartment measuring approximately 1.6m × 2.5m. Each is equipped with a squat toilet, sink, and ventilation system, suitable for temporary venues such as construction sites and exhibitions.
• Length range of 1.2m to 3.0m: Some factories offer customization services, where the length can be adjusted according to needs, while the width and height are usually maintained between 1.2m to 1.8m and 2.3m to 2.5m respectively, to balance space utilization and user comfort.

3. Custom Specifications for Special Scenarios
For barrier-free requirements or high-end scenarios, the dimensions of mobile toilets are further optimized:

• Width extended to over 1.8m: Reserved turning space for wheelchair users, with interior facility layouts complying with barrier-free design specifications.
• Height exceeding 2.5m: Some models improve ventilation by increasing height or reserve space for the installation of air conditioners or fresh air systems.

Selection Recommendations:

• Temporary events: Prioritize single toilets measuring 1.1m × 1.1m × 2.3m or 1.3m × 1.3m × 2.3m for easy transportation and rapid deployment.
• Long-term construction site use: Recommend models measuring 1.2m × 1.7m × 2.5m or the combination type measuring 2.5m × 6.5m, balancing durability and functionality.
• Barrier-free requirements: Confirm whether the width is ≥1.8m and check for the presence of handrails, low-position sinks, and other facilities.