Specifications of Mobile Toilets in Dongguan

The specifications of mobile toilets in Dongguan vary depending on their type, functionality, and supplier. Common specifications are as follows:

I. Simple Public Toilets (Taking Shenzhen Guanghui Traffic Facilities Engineering Co., Ltd. as an example)
These toilets are primarily modular in design, with fixed dimensions that can also be customized.

• Single-door specifications: Length 1.1 meters, width 1.1 meters, height 2.3 meters, suitable for single-person independent use scenarios.
• Double-door to four-door specifications: The width expands linearly with the increase in toilet compartments (double-door 2.1 meters, triple-door 3.1 meters, quadruple-door 4.1 meters), while the length and height remain unchanged, meeting the needs of 2-4 people using simultaneously.
• Customization options: Colors support standard shades such as sky blue and ivory white, or can be adjusted according to requirements; dimensions can be flexibly adjusted based on site conditions.

II. Luxury Mobile Toilets (Taking Guangdong Bianjie Environmental Protection Equipment Co., Ltd. as an example)
These products are mainly designed for high-end scenarios, with dimensions determined by specific types.

• Vehicle-mounted/container-type: Specific dimensions are not provided, but they emphasize a "multi-compartment" design, suitable for high-traffic scenarios such as large events or transportation hubs.
• Mobile single-unit toilets: Designed for scenic spots or outdoor environments, fully customizable, with dimensions determined by functional requirements (such as whether they include a sink or management room).
• Other types: Such as ecological toilets used in residential areas, schools, hospitals, etc., are also primarily customized, with no fixed dimensional standards.

III. General Standard Specifications (Referencing Industry Norms)

1. Basic Mobile Public Toilets

   • Single-person units: Minimum dimensions are length 1.2 meters, width 1 meter, height 2.2 meters; regular dimensions are length 1.5 meters, width 1.2 meters, height 2.3 meters, suitable for ordinary public places.
   • Double-person units: Regular dimensions are length 2.5 meters, width 1.5 meters, height 2.3 meters, meeting the needs of two people using simultaneously.

2. Functional Mobile Public Toilets

   • Accessible toilets: Must accommodate wheelchair turning space, with dimensions requiring a minimum length of 2 meters, width of 1.5 meters, and height of 2.4 meters, equipped with auxiliary facilities such as handrails.
   • Maternity/family toilets: Dimensions are approximately length 2.2 meters, width 1.8 meters, height 2.4 meters, with internal facilities such as baby changing tables and child seats required.

3. Mobile Toilets for Special Scenarios

   • Scenic spot/event temporary toilets (multi-unit): Combinations of 4-6 toilet compartments, with lengths of approximately 5-8 meters, widths of 2 meters, and heights not specified but needing to adapt to outdoor environments.
   • Large container-type: Lengths can exceed 6 meters, widths over 2.5 meters, suitable for long-term fixed use scenarios.
   • Compact-type: Dimensions can be reduced to length 6 meters, width 2 meters, suitable for space-constrained areas.

Summary: The selection of mobile toilet specifications in Dongguan should be based on the usage scenario, traffic volume, and functional requirements. Simple toilets are suitable for short-term or low-cost projects; luxury toilets are suitable for high-end scenarios; and general standard models cover most public needs. Customization services can further optimize space utilization and user experience.