Dandong Mobile Toilet Dimensions and Specifications

The dimensions and specifications of mobile toilets in Dandong vary depending on the type, as detailed below:

Foam-type Eco-friendly Public Toilets
The exterior dimensions of this type of toilet must be no less than 1200mm in length, 2200mm in width, and 2850mm in height, with a minimum specification of 1200mm×2200mm×2850mm. If equipped with a management room, the dimensions must be no less than 1500mm in length, 2200mm in width, and 2850mm in height, with a minimum specification of 1500mm×2200mm×2850mm. These public toilets are typically used in scenarios with high environmental protection requirements, where foam technology reduces water consumption, and the dimensions are designed to balance functionality and space utilization.

Simple Mobile Toilets for Construction Sites
For temporary use scenarios such as construction sites, the standard dimensions of a single-toilet unit are 1300mm×1500mm×2000mm (length×width×height). This size meets basic usage needs while considering the portability and rapid deployment requirements of construction site environments, with a slightly lower height compared to other types to accommodate space constraints at construction sites.

Commonly Available Finished Mobile Toilets on the Market

1. Single-person Type

   • Regular Model: 110cm in length, 110cm in width, and 230cm in height (1100mm×1100mm×2300mm), suitable for public areas with low pedestrian traffic.
   • Mini Single Model: 100cm in length, 100cm in width, and 220cm in height (1000mm×1000mm×2200mm), with a smaller volume suitable for spaces with limited room.
   • Regular Single Basic Model: Approximately 1.1m×1.1m×2.3m in length, width, and height, similar in size to the regular model, emphasizing basic functional configurations.

2. Double-person Type

   • Standard Model: 180cm in length, 110cm in width, and 230cm in height (1800mm×1100mm×2300mm), capable of accommodating two people simultaneously, suitable for shopping malls, scenic spots, etc.
   • Double Shared Model: The length is increased to approximately 2.5m (2500mm×1100mm×2300mm), with the width and height unchanged, improving usage efficiency by extending the length.

3. Barrier-free Model

   • Standard Size: 180cm in length, 150cm in width, and 240cm in height (1800mm×1500mm×2400mm), with wider doors and larger interior space to facilitate wheelchair access.
   • Enlarged Model: Dimensions of 1.5m×1.8m×2.4m (length×width×height), further optimizing the barrier-free usage experience, suitable for special places such as hospitals and nursing homes.

4. Small Portable Foldable Model
   The folded size can be reduced to 1m×1m×2m (length×width×height), facilitating transportation and temporary storage, suitable for short-term use scenarios such as exhibitions and events.