Dandong Mobile Environmental-Friendly Toilet
The mobile environmental-friendly toilets available in Dandong mainly include products manufactured by Dalian Fuhua Hengrun Industrial Co., Ltd. and Dalian Pohang Environmental Protection Equipment Co., Ltd., each with its own characteristics.
Products from Dalian Fuhua Hengrun Industrial Co., Ltd.: The model is FHJC - 02, which is a waterless ecological environmental-friendly toilet. The material is color-coated steel plate, and the sewage discharge method is direct discharge. It is suitable for various fields, with a product grade of high-quality. The voltage is 220V and it can be customized. The place of origin is Dalian. Its internal facilities are simple and practical, equipped with a pedal-type toilet. The toilet is flushed by a water valve, and the space at the bottom of the toilet trough is used for storing feces. The toilet design is relatively well-developed. When in use, the stored feces below cannot be seen, avoiding visual pollution and effectively suppressing the leakage of odors. Each toilet flush only requires 1 - 2 liters of water, demonstrating good water-saving performance. A large-diameter exhaust pipe is installed on the feces storage trough to ensure fresh indoor air.
Products from Dalian Pohang Environmental Protection Equipment Co., Ltd.: The product model is 25, which is a foam-type environmental-friendly public toilet. The frame adopts a light steel keel frame structure with a lifting design for easy installation and transportation. The external dimensions of the toilet are length * width * height ≥ 1200 * 2200 * 2850, and the dimensions of the management room are length * width * height ≥ 1500 * 2200 * 2850. The internal construction facilities are complete, with a clean appearance, reliable locks, and sturdy hanging hooks. The panels in the toilet stalls are environmentally friendly, waterproof, corrosion-resistant, flame-retardant, and heat-insulating. The exterior wall panel material is Japanese metal carved composite board, with a beautiful and generous appearance, smooth lines, and able to coordinate with modern urban landscapes. The exterior wall adopts Japanese metal carved insulation board, the interior wall adopts aluminum-plastic panels with a 50mm insulation layer in between, and the roof is Owens Corning tiles, with no rain leakage. There is an internal ceiling, the floor is made of anti-slip marble, and the bottom beam is welded with channel steel, ensuring a sturdy and reliable structure. Male and female signs and Chinese-English public toilet signs are set outside the toilet doors. The toilet stalls adopt both natural ventilation and forced ventilation methods, with a forced ventilation air exchange rate of not less than 40m³/h. The lighting uses energy-saving lamps, the power distribution system is safe, the voltage is uniformly rated at AC220V, with a high degree of automation, stable and reliable system, and easy operation. The toilet foam is of stable and reliable quality, with uniform and fine foam, high tension, and equipped with intelligent operation. Temperature control and fault diagnosis alarms are all automatically controlled. Each toilet stall and management room are equipped with an infrared radiation heater automatic temperature control system to ensure normal use in winter.
