Creative Mobile Toilet Boutique

There are mainly two types of boutique cases for creative mobile toilets: those made using water storage barrels and those crafted using chemical barrels. Here are the specific introductions:

Making a Mobile Toilet Using a Water Storage Barrel

• Materials and Tools: The main materials include a water storage barrel, wooden boards, universal wheels, wooden strips, self-tapping screws, sponge strips, plastic soft boards, discarded honeycomb wooden boards, foam strips, plastic buckets, water pipes, toilets, and water tanks, etc. Tools include angle grinders, etc.
• Production Process: First, use an angle grinder to split the water storage barrel in half lengthwise. Fix universal wheels at the four corners of the wooden board for mobility. Use wooden strips and self-tapping screws to increase the height of the barrel. Cut an opening on the side of the water storage barrel, install sponge strips to form the door frame, and embed plastic soft boards to create raised walls. Place the upper half of the water storage barrel on top of the wooden strips as the roof and apply white waterproof paint to enhance aesthetics. Use foam strips to拼接 (assemble) discarded honeycomb wooden boards to make a simple door. Cut a hole at the bottom of the barrel to install a drainage pipe to form a floor drain. Cut holes on the side and bottom of the plastic bucket to install direct connectors, place another plastic bucket over it to form a small water storage device, connect a water pipe-made bath heater, install a three-way connector to connect the showerhead, place the toilet and install the water tank, secure it with glass glue, connect the drainage pipe to the sewage bucket, horizontally connect a water pipe at the three-way connector of the outlet pipe and extend it to the door as the inlet pipe for the sink, and cut a hole in the door to install the connector.

Building a Mobile Toilet Using Two Chemical Barrels

• Materials and Tools: The materials include two large chemical barrels, iron frames, rectangular iron sheets, PVC pipes, toilets, water tanks, hinges, wooden doors, handles, etc. Tools include cutting machines, etc.
• Production Process: First, remove the steel bars on top of the chemical barrels and use a cutting machine to completely cut off the lids of the plastic barrels. Place the two plastic barrels upside down together and fix the upper and lower iron frames. Cut an opening the size of a door frame on one side, and also cut the inner plastic barrel accordingly. Find a rectangular iron sheet and use screws to fix the gaps between the two plastic barrels. Cut holes in the corners of the plastic barrels to install PVC pipes and apply sealant, cut off the excess PVC pipes, place the toilet on top, install the toilet water tank and secure it with glue, connect and install the inlet pipe and sink, make a showerhead with a PVC pipe and connect it for installation, install two wooden doors using hinges and attach handles, extend and connect the inlet pipe, lay the water pipe flat to the bottom of the plastic barrel, and finally test all functions and connect the drainage outlet to a water pipe and a septic tank.