Volver al blog
Artículo

Does Container House Provide Sun and Heat Protection?

Admin 15 de septiembre de 2026

Container houses can effectively achieve sun and heat protection and provide a comfortable living environment through multi-layer structural design and material selection. Here is a detailed analysis:

1. Key Thermal Insulation Structure
The thermal performance of container houses relies on three core layers: The outer layer uses anti-corrosion color-coated steel plates to reduce heat absorption by reflecting sunlight. The middle layer is filled with over 50mm of polyurethane foam to block heat conduction paths. The inner layer combines fire-resistant gypsum boards with moisture-proof membranes to jointly control humidity and temperature fluctuations. This design results in a wall heat transfer coefficient of ≤0.45W/(㎡·K), with thermal insulation efficiency 1.8 times that of traditional brick-and-concrete walls. In actual tests, the temperature rise inside the container in summer is delayed by 22 minutes compared to the outside, and in winter, the indoor temperature only drops by 1.3℃ after being closed for 8 hours, providing a more stable perceived temperature.

2. Material Selection and Process Optimization

  • Wall Materials: Commonly used materials include rock wool, glass wool, or polyurethane sandwich panels, which offer both thermal insulation and fire resistance. For example, sandwich panels with aluminum foil reflective layers can further reflect thermal radiation. Combined with bottom ventilation slot designs, they form an air convection layer to accelerate heat dissipation.
  • Floor and Roof: The floor uses cement fiber boards or steel-wood composite floors, while the roof is equipped with adjustable sunshades to reduce direct sunlight exposure. Some cases employ sloped roof designs to expand the heat dissipation area, combined with double-glazed windows and doors to reduce heat conduction efficiency.
  • Structural Reinforcement: Hot-dip galvanized cold-formed steel frames combined with metal plate/calcium silicate board walls ensure structural strength while using low-specific-heat materials to reduce heat storage.

3. Practical Case Verification
A café in Moganshan adopted a double-layer container structure and remained comfortable without air conditioning under direct afternoon sunlight, thanks to the synergistic effect of the aluminum foil reflective layer and ventilation slots. A homestay project by Qinghai Guangzan Light Steel showed that a 100mm composite wall offered thermal insulation performance comparable to a 610mm-thick brick-and-concrete wall, with an occupancy rate 20% higher than traditional wooden houses. Guests reported that the "iron box" felt warmer than brick houses. A wind power project camp in Xinjiang built a 500-person living area within 7 days using modular design, with actual measurements showing that the indoor temperature in summer was 8-10℃ lower than the outside, verifying the efficient thermal insulation performance of industrial prefabrication.

4. Limitations and Improvement Directions
Low-end products (priced between 5,000-8,000 yuan) may suffer from reduced thermal insulation performance due to insufficient material thickness. It is advisable to choose products in the 11,000-16,000 yuan price range to ensure quality. Additionally, metal materials have strong sound transmission effects, requiring designs with double-layer rock wool and double-glazed windows and doors to improve sound insulation performance.