Container House Strip Foundation Drawing
When using a strip foundation for container houses, it is necessary to design it in combination with the characteristics of light self-weight and flexible structure of container houses, with a focus on load transfer, foundation bearing capacity, and moisture-proof treatment. The following are the specific key points:

Definition and Applicability of Strip Foundations
A strip foundation is a long, continuous foundation poured along the direction of walls or columns. Its core function is to evenly transfer the loads from the superstructure to the foundation. For container houses, strip foundations are particularly suitable for single-story or low-rise structures in scenarios where the foundation soil is relatively uniform and the bearing capacity meets the requirements. Due to the light self-weight of containers (only 1/5 to 1/8 of that of traditional houses), the design of strip foundations can be simplified, reducing material costs.
Design Key Points and Construction Process
Selection of Foundation Types
- Wall-under Strip Foundation: Directly arranged below the container walls, suitable for standalone containers or houses formed by side-by-side splicing of containers.
- Column-under Strip Foundation: If the containers are supported by corner fittings or columns, strip foundations need to be set below the column positions to form a continuous load-bearing structure.
- Well-grid Strip Foundation: In complex layouts or when multiple containers are combined, the overall stability can be enhanced through crisscrossing strip foundations.
Dimensions and Materials
- Width and Depth: Calculated based on the foundation bearing capacity, the width is usually not less than the width of the container, and the depth needs to penetrate the soft soil layer to the bearing layer (such as old soil layer or rock layer). For example, the width of strip foundations for light steel villas is often 0.6-1.2 meters, and the depth is 0.8-1.5 meters.
- Material Selection: Priority is given to C20-C30 concrete, and the reinforcement configuration needs to meet the requirements for shear and bending resistance. If the foundation is poor, crushed stones can be replaced or a plain concrete cushion can be used for reinforcement.
Construction Steps
- Surveying and Setting Out: Use a total station to locate the house coordinates and set out the axis positioning piles to ensure that the foundation matches the dimensions of the container.
- Foundation Pit Excavation: Excavate the foundation trench according to the design dimensions, compact the bottom, and lay a 100mm thick crushed stone cushion.
- Reinforcement Binding and Formwork Installation: Arrange a reinforcement mesh along the foundation trench, install formwork, and then pour concrete, reserving positions for container anchoring parts.
- Curing and Backfilling: The concrete curing period should be no less than 7 days, and the backfill soil should be compacted in layers to avoid settlement.
Special Scenario Handling
- Moisture-proofing and Insulation: A moisture-proof layer (such as asphalt felt) needs to be laid between the bottom of the container and the foundation, and an insulation board (such as XPS extruded polystyrene board) should be set to prevent the cold bridge effect.
- Soft Soil Foundation: If the foundation bearing capacity is insufficient, a combined form of pile foundation and strip foundation can be adopted, or an enlarged foundation plate can be added below the strip foundation.
- Splicing Nodes: When multiple containers are spliced, a reinforced strip foundation needs to be set at the joints to ensure continuous load transfer.
Advantages and Limitations
- Advantages: Low cost, fast construction, and strong adaptability, especially suitable for rural or temporary building scenarios with uniform geology and small loads.
- Limitations: It has high requirements for the uniformity of the foundation. If the foundation settlement is uneven, it may lead to cracking of the container structure, so a geological survey needs to be carried out in advance.




