Volver al blog
Artículo

Container House Steel Structure

Admin 15 de septiembre de 2026

The steel structure of container houses uses high-strength steel as the main frame, achieving a balance between structural stability, disassembly and assembly capabilities, and cost-effectiveness through modular design and standardized connection nodes. The following analysis is conducted from four dimensions: materials, structure, connection methods, and performance optimization.

1. Steel Selection and Structural Stability
Mainstream manufacturers commonly use high-strength weather-resistant steel (such as Q355B grade) as the main frame material, with a yield strength approximately 30% higher than that of ordinary carbon steel, capable of supporting container structures with a length-to-width ratio close to 2:1. For example, products from Suzhou Zhongnan Steel Structure Co., Ltd. use a galvanized steel frame with a thickness of ≥2.0mm, achieving a wind resistance rating of 12 and seismic performance compliant with the GB50011-2010 standard, with no significant deformation observed in the frame under simulated 8-magnitude earthquake conditions. In contrast, non-standard products often use ordinary steel with a thickness of ≤1.2mm, achieving only a wind resistance rating of 6, which can easily lead to safety incidents.

2. Modular Design and Self-Balancing Mechanism
Container houses form a self-balancing system through rigid connections between corner fittings and side beams, reducing the need for external supports. For example, Yiqi Company adopts a dual-fixing mode of 'wedge-shaped locks + high-strength bolts', with the wedge-shaped lock designed at a 15-degree angle to produce a self-locking effect under horizontal shear forces. Measured displacement is controlled within 3mm during an 8-magnitude rare earthquake, outperforming conventional welded nodes by approximately 40% in terms of deformation amplitude. This design also supports multiple disassemblies and assemblies, with a single container body capable of being reused more than 15 times without significant degradation in structural stability.

3. Enclosure Structure and Thermal Performance Optimization
To enhance thermal insulation performance, manufacturers use composite structures instead of traditional foam sandwich panels. For example, Yiqi Company employs a three-layer structure of 'rock wool - air layer - aluminized zinc plate', with a rock wool layer thickness of 75-100mm and a thermal conductivity of ≤0.040 W/(m·K). Combined with a 5mm closed air layer, the overall heat transfer coefficient (U-value) is below 0.5 W/(m²·K), effectively reducing condensation risks in Inner Mongolia's low-temperature winter environment and extending the service life of the steel structure.

4. Connection Nodes and Seismic Adaptability
For regions with high seismic design intensity, manufacturers improve seismic performance by optimizing connection nodes. For example, products from CIMC Modular Building Investment Co., Ltd. use a semi-welded semi-bolted connection structure, which, although slightly more prone to bolt loosening after long-term cycling compared to fully welded structures, still meets wind resistance requirements of 10. Meanwhile, the fully automated welding process used by Suzhou Zhongnan achieves weld strength compliant with the GB/T 19001-2016 standard, with frame deformation of only 2mm under 12-magnitude strong winds, well below the national standard limit of 10mm.